Press q VOL wto set the current minute.
Press CLOCK. The clock starts.
5
6
q VOL w.
You can rotate the VOLUME knob on the unit to reduce or bring up the volume continuously.
• Press 9 ON/STANDBY to put the unit in the standby mode when it is not being used.
Setting the Clock
1 If the unit is on, press 9 ON/STANDBY to turn it standby.
2 Press CLOCK to show the time on the display.
• The time appears on the display (if the time is not set after it blackout, “--:--” blinks). Press CLOCK again, the “hour” value starts blinking.
• When no button is pressed for 30 seconds, the time setting mode will be cancelled.
3 Press q VOL wto set the current hour.
4 Press CLOCK.
The “minute” value starts blinking.
Play the source, and adjust the volume using
3
1 Press 9 ON/STANDBY to turn the unit on.
• The unit turns on with the source that was last selected.
2 Press DVD, iPod/USB, FM, or LINE to select a source.
The selected source is shown on the front panel’s display.
Press LINE repeatedly to switch between LINE 1 and LINE 2.
Also, each time INPUT on the unit is pressed, the source changes as follows:
• DVD Source
• iPod
• USB Source
• FM Radio
• LINE1 Source
• LINE2 Source
Basic Operation
En
18