Soundstream Technologies Features, SPL 55 Midrange / Woofer, Aluminum Dome Neodymium Tweeter

Page 3

FEATURES

SPL 55 Midrange / Woofer

The SPL 55 is an excellent performer with a combination of high sensitivity, solid bass and smooth response throughout the audible range.

Lightweight Cone designed for good rigidity and high sensitivity

2 Ohm Voice Coil for increased voltage sensitivity and higher output

Aluminum Dome Neodymium Tweeter

The SPL 55's coaxially mounted tweeter is a high performance 1” Neodymium tweeter designed to deliver outstanding high frequency reproduction.

Black Aluminum 1" dome for improved power handling and linear response

Ferrofluid-immersed Voice Coil enhances heat dissipation

Vented Aluminum Voice Coil Former for superb heat dissipation and high power handling

Passive Crossover Network

The crossover consists of high quality, 2 pole design for improved power handling, lower distortion and better imaging.

Acoustic Summation design combines the crossover with the speaker's natural roll-off for a steeper slope and increased power

Dynamic tweeter protection allows for improved power handling and continuous output

2 Ohm Nominal System Impedance

The 2 Ohm impedance design of the SPL 55 system provides an overall 3 dB increase in output compared to a 4 Ohm design.

Effectively a doubling of Sound Pressure Level -- with the same voltage input

More stable, phase coherent load than two 4 Ohm speakers

3

55.pub

Friday, September 10, 1999 21:03

page 3

 

Image 3
Contents Ohm Nominal Coaxial Speaker Hardware ConnectorPassive Crossover Network FeaturesSPL 55 Midrange / Woofer Aluminum Dome Neodymium TweeterLocation and Mounting Installing THESPL55 Head Unit Amplifier SPL 55 Specifications DimensionsMetal Dome Tweeter Blue Ravine Road Folsom California 95630 USA