SV Sound PB12-Plus, PC12-Plus, SB13-Plus Power Mode Switch, Outputs, Main Power Switch, Power Cord

Page 12

STA-800D/1000D Equipped Subs

SVSound

Connectivity & Panel Operations

Power Mode Switch

The Power Mode switch allows the STA-800D/STA-1000D to either stay on all the time, or go into Standby if no signal is being received. When in Standby mode and a signal is detected on one of the inputs, the STA- 800D/STA-1000D will turn on and begin playing the material on its active input(s).

Outputs

There are two types of physical output connectors on the STA-800D/STA1000D; Balanced XLR and single- ended with RCA connectors (also referred to as low level or line level). There are outputs for Left and Right main channels for both types of connectors.

The output connectors are typically used to either daisy-chain additional subwoofers with single or dual unfiltered outputs, or as the input to a power amplifier for the Left and Right main channels after using the High Pass Filter and (optionally) Delay functions with two channel analog preamps (see discussion above under “Inputs”).

Main Power Switch

Use this switch to apply power to the STA-800D/STA-1000D amplifier.

Power Cord

Plug the power cord into a wall outlet. Do not use extension cords to lengthen the cord. Do not plug into accessory outlets on the back of an AVR or pre/pro.

© 2011 Specialty Technologies, LLC Call SVSound877.626.5623 www.svsound.com

12

Image 12
Contents Manual Version 1.4 June Table of Contents Important Safety Instructions Important Safety Instructions Welcome About your SVS Subwoofer Operation of the Power Mode Switch Input Configuration InputsConnectivity & Panel Operations Connectivity & Panel Operations Connectivity & Panel Operations Power Mode Switch Main Power SwitchPower Cord OutputsIntegrated Function Controller Volume High Pass Filter HPF Adjustment STA-1000DLow Pass Filter LPF Adjustment Phase DegreeHigh Pass Delay STA-1000D Room Gain CompSubwoofer Tune Ported Subwoofers Only EQ Parametric EQualizerIntegrated Function Controller Integrated Function Controller Integrated Function Controller Setup, Calibration & Integration Unpacking and Subwoofer LocationPower and Signal Connection Calibrating the Subwoofer Setup, Calibration & Integration Setup, Calibration & Integration Port Tuning Advanced Features Port Tuning Ported Subwoofers OnlySetup & Use of PEQ Advanced Features Parametric Equalizer PEQControl Effects Measuring In-Room Frequency Response Setup & Use of PEQ Setup & Use of PEQ Setup & Use of PEQ Advanced Features Room Compensation Room CompensationTerms & Conditions
Related manuals
Manual 21 pages 58.64 Kb Manual 16 pages 42.99 Kb

SB13-Ultra, PC13-Ultra, SB13-Plus, PB13-Ultra, PC12-Plus specifications

SV Sound has made significant strides in the world of high-performance audio with its acclaimed lineup of subwoofers, including the PC12-Plus, PB12-Plus, PB13-Ultra, SB13-Plus, and PC13-Ultra. Each model is designed to deliver unparalleled sound quality and an immersive listening experience, making them ideal for both home theaters and music enthusiasts.

The PC12-Plus is a compact, ported subwoofer that boasts a 12-inch driver capable of producing thunderous bass. Its cabinet design optimizes airflow, reducing distortion while enhancing low-frequency output. The built-in amplifier delivers 300 watts of continuous power, with peak output reaching up to 700 watts, ensuring that every rumble is felt as much as it is heard. The PC12-Plus is also equipped with adjustable phase control and low-pass filters, allowing users to finely tune their bass response based on their room acoustics.

The PB12-Plus features a similar design but emphasizes portability and efficiency. Also utilizing a 12-inch driver, it emphasizes the ability to generate room-filling bass without compromising space. The built-in amplifier matches the PC12-Plus in power, promising rich low frequencies ideal for both cinematic action sequences and music playback alike. Its robust cabinet construction allows for minimal vibration and resonance, maintaining clarity in sound reproduction.

For those seeking uncompromising power, the PB13-Ultra is a standout. This subwoofer features a larger 13.5-inch driver and an impressive 1000 watts of continuous power, peaking at 3700 watts. This model is engineered for serious enthusiasts who demand deep-reaching bass extension, and it excels in both music and home theater settings. The advanced DSP technology provides users with precise control over the subwoofer’s settings, allowing for an incredibly adaptable performance.

The SB13-Plus is a sealed subwoofer that excels in delivering tight, accurate bass response. Its design minimizes distortion while maximizing punch, making it an excellent choice for music lovers who appreciate precision. This subwoofer is equipped with similar power specs to the PB12-Plus, offering 300 watts continuous and 700 watts peak power. Its compact design makes it versatile enough to fit in smaller spaces without sacrificing sound quality.

Finally, the PC13-Ultra combines elements from its predecessors with upgraded specifications. Featuring an ultra-long-throw 13.5-inch driver and an expansive amplifier setup, it can produce overwhelming bass that resonates throughout larger spaces. It incorporates advanced room correction technologies, ensuring optimal performance regardless of placement.

In summary, SV Sound’s PC and PB subwoofers are characterized by their robust design, powerful amplifiers, and advanced technologies. Each model serves unique needs, offering powerful bass while maintaining clarity and precision, from compact designs for finesse in smaller spaces to large models that dominate in larger environments.