Texas Instruments TAP6203A1 manual Shutdown

Page 17

			Quick Start List for Stand-Alone
5)	Connect the		pin through a normally open switch to GND.
		SHUTDOWN
6)	Connect an 8-Ω–32-Ωspeaker to the module OUT+ and OUT– pins.

-Power Up

7)Verify correct voltage and input polarity and set the external power supply to on.

The EVM begins operation.

8) Adjust the signal source level as needed.

Operation2-5

Image 17

Contents User’s Guide Important Notice EVM Important Notice EVM Warnings and Restrictions Information About Cautions and Warnings Read This FirstFCC Warning Tables ContentsPage Introduction Feature Highlights TI TPA6203A1 Audio Amplifier Evaluation Module DescriptionTPA6203A1 EVM Specifications JP7 OperationEVM Power Input PrecautionsPlatform preparations Quick Start List for PlatformQuick Start List for Stand-Alone Shutdown 1 TPA6203A1 EVM Connected for Stereo BTL Output References2 TPA6203A1 EVM Schematic Diagram 4 TPA6203A1 EVM PCB Layers TPA6203A1 EVM Bottom Layer