Adjusting the CEC Settings
The CEC function on your TV enables you to control
Not all HDMI devices support CEC. See your device’s user manual for details.
To enable, disable, or adjust CEC settings:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight System and press OK. The System menu is displayed.
3.Use the Arrow buttons on the remote to highlight CEC and press OK. The CEC menu is displayed.
4.Use the Arrow and OK buttons to adjust each setting:
•CEC Function - To use CEC, you must select Enable.
•System Audio Control - When system audio control is on, you can control your device’s audio using the TV’s remote control.
•Device Discovery - Use this function to determine if your device is connected and supports CEC.
5.Press the EXIT button on the remote.
5
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.
To turn the Power Indicator Light on or off:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight System and press OK. The System menu is displayed.
3.Highlight Power Indicator and press OK.
4.Use the Up/Down Arrow buttons to select On or Off, then press OK.
39