•Retail - Sets the picture settings to values that produce a brighter, more vivid picture.
•Photo - Optimizes the picture settings for viewing photo slideshows. Flesh tones should appear more natural.
•Custom - Allows you to manually change each of the picture settings:
Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.
Contrast - Adjusts the white level of the picture. When this setting is too high, the picture may appear dark. When this setting is too low, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.
Sharpness - Adjusts the edge sharpness of picture elements. It can be used to sharpen
Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. This option is not available unless Ambient Light Sensor is set to OFF.
Adaptive Luma - Adjusts the average brightness of the picture to compensate for large areas of brightness.
Color Enhancement - Reduces oversaturation of some colors and improves flesh tones.
5
Color Temperature - Changes the “warmness” or “coolness” of the white areas of the picture.
Reset Picture Setting - Restores custom picture settings to the factory defaults.
Adjusting the Noise Reduction Setting
Noise reduction diminishes artifacts such as “blockiness” or “pixellation”. When activated, the resulting picture usually has softer edges.
To adjust the noise reduction setting:
1.Press the MENU/OK button on the remote. The
2.Use the Arrow buttons to highlight Picture and press MENU/OK.
3.Use the Arrow buttons to highlight Noise Reduction and press
MENU/OK.
4.Use the Arrow buttons to highlight Off, Low, Medium, or High, then press MENU/OK.
5.Press EXIT.
21