ViewSonic VS11964 warranty Four screws attaching the base

Page 12

Wall Mounting (Optional) For use only with UL Listed Wall Mount Bracket

To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following:

Step 1. Verify that the power button is turned Off, then disconnect the power cord. Step 2. Lay the LCD display face down on a towel or blanket.

Step 3. Remove the four screws attaching the base.

Step 4. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance), using screws of correct length.

Step 5. Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

Step 3-4. Four screws attaching the base

ViewSonic VP950b

9

Image 12

Contents ViewSonic Contents TCO Information CongratulationsCompliance Information For U.S.AFor Canada CE Conformity for European CountriesImportant Safety Instructions Declaration of RoHS Compliance Copyright Information Product Registration For Your RecordsProduct disposal at end of product life Package Contents PrecautionsBase Installation Quick Installation Turn on LCD display and computerLandscape/Portrait Modes To Raise and Lower the displayFour screws attaching the base Setting the Timing Mode OSD and Power Lock SettingsAdjusting the Screen Image Front Control PanelDo the following to adjust the display setting Following tips may help you optimize your displayMain Menu Controls Size Horizontal Size adjusts the width of the screen image ViewSonic VP950b ViewSonic VP950b Specifications Other InformationTroubleshooting No powerPower is on but no screen image Wrong or abnormal colorsCustomer Support = FAXCleaning the LCD Display To clean the screenTo clean the case DisclaimerLimited Warranty Viewsonic LCD DisplayExclusion of damages Mexico Limited Warranty Viewsonic Display ProductsMerida