ViewSonic VS10162 manual Wall Mounting Optional

Page 10

Wall Mounting (Optional)

To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following:

1.Verify that the Power button is turned OFF, then disconnect the power cord.

2.Lay the LCD display face down on a towel or blanket.

3.Remove the rear panel covers from the back of the LCD display.

4.Remove the four screws attaching the base.

5.Remove the Rubber Plugs from inside the four VESA screw holes.

6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).

7.Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

Four VESA screw holes

Rear panel covers

Four base screws

ViewSonic VX924

6

Image 10

Contents ViewSonic Contents Congratulations Why do we have environmentally labelled computers?TCO Information What does labelling involve?TCO Development Ecological requirementsCompliance Information Important Safety Instructions Product Registration For Your Records Copyright Information Product disposal at end of product life Precautions Package ContentsGetting Started Quick Installation Turn on LCD display and computerWall Mounting Optional Setting the Timing Mode Using the LCD DisplayOSD and Power Lock Settings Adjusting the Screen Image Front Control PanelDo the following to adjust the display setting Following tips may help you optimize your displayMain Menu Controls Control ExplanationControl Explanation Manual Image Adjust controls are explained below Control Explanation Specifications Other InformationPower is on but no screen image TroubleshootingNo power Wrong or abnormal colorsCustomer Support = FAXTo clean the case Cleaning the LCD DisplayTo clean the screen DisclaimerLimited Warranty Viewsonic LCD Display