Sharp GX-BT3 specifications Maintenance, Specifications

Troubleshooting chart (continued)

If problem occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

 Factory reset, clearing all memory

1Press the AUDIO IN (remote control) or FUNCTION button repeatedly (main unit) to select AUDIO IN function.

2Press / button.

3Within 1 second, press and hold button until PAIRING indicator lights up.

PAIRING

Caution:

This operation will restore the unit to factory default condition.

Before transporting the unit

Caution:

Remove all devices plugged in to the unit. Then, set the unit to the power stand-by mode. Transporting the unit with other devices plugged in might damage the units.

Maintenance

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a di- luted soap solution, then with a dry cloth.

Caution:

Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet.

Do not apply oil to the inside of the unit. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nomi- nal values of production units. There may be some devia- tions from these values in individual units.

 General

Power source	AC 100 - 240 V ~ 50/60 Hz
Power	AC: Power on: 5 W
consumption	Power stand-by: 0.4 W (*)
Dimensions	Width: 446 mm (17 - 9/16’’)
	Height: 155 mm (6 - 1/8”)
	Depth: 154 mm (6 - 1/16”)
Weight	2.5 kg (5.5 lbs.)
Frequency band	2.400 GHz - 2.480 GHz
Compatible	A2DP (Advanced Audio
Bluetooth Profile	Distribution Profile), AVRCP (Audio/
	Video Remote Control Profile)
	Bluetooth 2.1 +EDR

( * ) This power consumption value is obtained when the Bluetooth stand-by mode is cancelled in the power stand-by mode. Refer to page 4 to cancel the Blue- tooth stand-by mode.

 Amplifier

Output power	Front speaker:
	RMS: 10 W (5 W + 5 W) (10%
	T.H.D.)
	RMS: 7 W (3.5 W + 3.5 W) (1%
	T.H.D.)
	Subwoofer:
	RMS: 10 W (10% T.H.D.)
	RMS: 8 W (1% T.H.D.)
Input terminals	Audio In (audio signal):
	500 mV/47 k ohms
 Speaker
Type	2-way type speaker system
	Front Speakers:
	5 cm (2”) - 3 Ω - Full Range
	Subwoofer: 8 cm (3-1/8”) - 6 Ω
	- woofer
Maximum input	Front Speakers: 10 W / Channel
power	Subwoofer: 10 W / Channel
Rated input	Front Speakers: 5 W / Channel
power	Subwoofer: 5 W / Channel

E-10