Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M

PRESET (Continued)

Presetting the Channels (MANUAL)

Upper control panel

VOL	CH	MENU TV/VIDEO
2		PRESET 1

4 3 1,2,6

POWER

■Setting a channel to a desired TV station:

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than two seconds. The AUTO mode screen appears.

2 Press MENU (PRESET-1) to display the MANUAL mode screen. Press MENU (PRESET-1) again to change the MANUAL mode as shown below.

Sound System

DISPLAY

SLEEP

BRIGHT

LANGUAGE DIS.MODE VIDEO

VOL(+)/(–)

VOL CH

CH ( )/( )

CHANNEL

SELECT

MPX-/--

AUTO → MANUAL →	LANGUAGE →	NORMAL
		SCREEN

3 Select the channel position using CHANNEL SELECT or CH ()/ ().

4 Press VOL (+)/(–)to locate the channel you want to preset to the position. Search is initiated and when a TV signal is received during the search, the search stops.

5 Repeat steps 3 and 4 above, to preset the channel positions for other broadcasts, etc.

6 Press MENU (PRESET-1) to return to the normal screen.

Auto mode screen

Manual mode screen

Upper control panel

VOL	CH	MENU TV/VIDEO
2		PRESET 1

4 1,2,3,5

Note:

•SYSTEM may not have been set correctly, if noise can be heard or if there is no sound.

In such case, reset to SOUND SYSTEM using MENU.

■In a weak reception area, or under bad reception conditions.

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than two seconds. The AUTO mode screen appears.

2 Press MENU (PRESET-1) to display the MANUAL mode screen.

3 While the MANUAL mode screen is displayed, press MENU for more than 2 seconds.

The channel position number remains in green.

Note:

•While the MANUAL mode screen is displayed, press MENU.

(The LANGUAGE mode screen will appear.)

4 Adjust for good reception using VOL (+)/(–).

5 After finishing the adjustment, press MENU (PRESET-1) to continue channel presetting.

Channel position

number

➡

ENGLISH

SELECT:

EXIT: MENU