Advanced CD or MP3/WMA disc playback (continued)
■Random play
The tracks on the disc can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control until “RANDOM” appears. Press the 
/
button.
To cancel random play:
Press and hold the PLAY MODE button until “NORMAL” appears and “R” disappears.
Notes:
●If you press the 
button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track.
●The beginning of the track being played will be located. In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat play, be sure to press the 
(CD 
) button. Otherwise, the disc will play continuously.
■Programmed play (CD)
You can choose up to 32 selections for playback in the order you like.
1Whilst in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.
2Press the 
or 
buttons on the remote control to select the desired track.
Selected track number
3Press the MEMORY button to save the track number.
4Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, press the MEMORY button repeatedly. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.
5Press the 
/
button to start playback.
■Programmed play (MP3/WMA)
1Whilst in the stop mode, press the MEMORY button to enter the programming save mode.
2Press the TUNING/FOLDER (
or 
) button on the remote control to select the desired folder.
Then press the 
or 
button on the remote control to select the desired tracks.
3Press the MEMORY button to save the folder and track number.
4Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programmed.
5Press the 
/
(CD 
/
) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the 
(CD 
) button. The display will show “MEM CLEAR” and all the programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the previous programme.
Notes:
●When a disc is ejected, the programme is automatically cancelled.
●If you press the
●During the programme operation, random play is not possible.
11