Sharp CX68RF5 operation manual Connecting to an antenna via a VCR

Page 49

Connections

Connecting to an antenna

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial and feeder cables.

If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the set.

If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the set.

TV

Standard DIN45325 plug (IEC169-2)

75-ohm coaxial cable (round cable) (not supplied)

300-ohm twin-lead	75-ohm impedance
flat feeder	converter
(not supplied)	(not supplied)

Antenna in

Connecting to an antenna via a VCR

You can also connect the TV set to the tuner on a VCR using the connection shown below.

TV

VCR

To antenna in terminal

To RF out

terminal

Antenna in

• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.

•Turn off the power on the TV set and the VCR being connected before making the above connections. Be sure the cord plugs are fully inserted in the connection terminals.

•See the operation manual of your VCR for connection details.

E 47

Image 49

Contents CX68RF5 300 135 WarrantyContents Dear Sharp Customer AccessoriesInsert the AC plug to the power outlet Easy setupDamage Safety precautionsLiquid entry Installing batteries in the remote control unit Remote controlPart names Bottom TV setWatching TV With the number buttons on remote controlWatching a TV programme Using headphone UsingPress to increase volume Press to decrease volume Operating the TV buttonsClock/Timer/Channel display Useful featuresMute Channel recall Sound modeTV/Video selection Selecting a menu item Selecting menu itemsTo enter Until normal screen appearsCH-SETTING menu Feature menuTimer menu Menu itemUsing Menu screen Settings and adjustmentsOn-screen display language selection Press MENU/PRESET twice to Display Manual mode Screen Manual channel tuningPress MENU/PRESET again to Display Auto mode screen Auto channel tuningPress On TV set Screen Press To select CH-SETTING Channel settingContinue Manual Fine tuningSort Deleting a program Delete TV2 at program number Picture adjustment Video Mode Dynamic Standard Soft Custom Contrast Repeat steps 4 and 5 above to adjust other items Sound adjustmentMO V I E MU S I C S T OM EqualizerTo display Feature menu To select FeatureBlue screen To select Blue BackPress / to display Feature menu Screen Press To select FeatureAuto select Press CH / CH to select Auto Select To select on or OFFComfy View mode screen disappear approximately five Seconds Using Remote ControlPressdirectly enter to the Comfy View mode screen Comfy viewMode Format of signal Input Mode set to OFF Mode set to onChild lock Setting the Child Lock mode For the first timePOSITION/LOCK Status To turn OFF or to change setting of Child Lock mode During demonstration is showing DemoClock Screen Press To select TimerPress CH / CH To select Clock Day On timerPress / to set the position Press CH / CH to select PositionOff timer To display Timer menu Press Reminder on-screen timerScreen Press To selectFlashing Screen appearsTo select View View timerPress To display View Menu Press To select Viewing Time To set the timePress CH To select Lock To select on or OFF Turn on power Beep reminder Favourite channels To preset another favourite Channel, repeat steps 1 AboveTo watch favourite channel Press a ColourFM Radio setting menu Connecting a FM Radio AntennaPress To select desired setting FM radioFrequency Press Menu / FM Radio to return back to TV modeConnections Connecting to a DVD playerWatching DVD Playback PlaybackConnecting to an antenna via a VCR Connecting to an antennaExample use of front terminals Connecting to video equipmentCheck List TroubleshootingModel CX68RF5 SpecificationsAVL Definition of TermsPage