LG Electronics E2211PU owner manual Connecting with the PC, Varies according to model

Page 13

Connecting the Display

Connecting with the PC

1.	Before setting up the monitor, ensure that the power to the monitor, the computer
2.	system, and other attached devices is turned off.
2.	Connect signal input cable 1 and power cord 2 in order, then tighten the screw

of the signal cable.

AConnect DVI-D(Digital signal) Cable

BConnect D-sub(Analog signal) Cable

CConnect Audio Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Varies according to model.

Wall-outlet type

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.

DVI-D (This feature is not available in all countries.)

12

Image 13

Contents LCD Monitor On Safety Important PrecautionsDo not Open the Display To Avoid Personal InjuryOn Installation On Repacking On CleaningOn Disposal Thank for selecting LGE products AccessoriesConnecting the stand base Connecting the Display E2211PURemoving the stand base Stand Body Stand Base Connecting the Display E2411PURemoving the stand base Positioning your display Connecting the DisplayErgonomic Landscape & Portrait You can rotate the panel 90o clockwise Using the Pivot functionVaries according to model Connecting with the PCOnly Analog Mode One USB Upstream port Connecting the USBUniversal Serial Bus CableFront Panel Controls Control Panel FunctionsSaving Button Menu Button OSD LOCKED/UNLOCKEDAuto Button Power IndicatorInput Button Exit ButtonScreen Adjustment On Screen Display OSD Control AdjustmentMenu Super Energy Saving On Screen DisplayOSD Selection and AdjustmentButton Tip Menu Name Icons Sub- menusExit Exit Main menu Sub menu DescriptionMain menu Description Menu Name Sub-menus Icons Button Tip Reset LED Saving Is the power indicator light on? TroubleshootingOSD Unlocked will appear Display image is incorrect Screen blinks Have you installed the display driver?Screen color is mono or abnormal Display Sync Input Video Input Resolution Plug&Play Specifications E2211PURange Power Input Stand Base Attached , Detached O Power cordPower Consumption Specifications E2411PUPreset Modes Resolution SpecificationsIndicator Installing the Wall mount plate Most computer stores Wall mount plateSeparate purchaseModel