If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
Connect component out of the DVD/CD Receiver to the input of your monitor / television, set your television or monitor to Component Input.
1.Select “Progressive Scan” on the DISPLAY menu then press „.
2.Select “On” using the •/‚buttons.
3.Pressing ENTER will set the player to Progressive scan mode.
Caution:
Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. First, remove the disc in the DVD/CD Receiver. Next, press STOP on the remote control(¢) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor
AUDIO
|
| a | b | |
AUDIO |
|
| ||
5.1 Speaker Setup |
| Select | ||
DRC |
|
|
| On |
|
|
| ||
Vocal |
|
| On | |
|
| |||
Move 
Select
c
a5.1 Speaker Setup
Make the following settings for the
1.Press ENTER and 5.1 Speaker Setup menu appears.
2.Use ƒ/„to select the desired speaker.
3.Adjust options using •/‚/ƒ/„buttons.
4.Press ENTER to confirm your selection. Returns to the previous menu.
Speaker Selection
Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)]
Note:
Certain speaker settings are prohibited by the DolbyDigital licensing agreement.
Size
Since the speaker settings are fixed, you cannot change the settings.
Volume
Press ƒ/„to adjust the output level of the selected speaker.
Distance
If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.
Press ƒ/„to adjust the Distance of the selected speaker.(You can’t adjust front /Woofer speakers)
Test
Press ƒ/„to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.
Front Left (L) →Center→FrontRight(R)→
Rear Right (R) →Rear Left (L) →
b
With the DVD*1 format, you can hear a program’s sound track in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. *1:Dolby Digital only
c
LOCK(Parental Control)
a
LOCK
Rating 
Unlock
Password 
Area Code |
| IN |
Move 
Select
c b
a
Continued on page No. 15
11