Optional Equipment Connection
OPTICAL IN connection (O)
DVD Player (or Digital Device, etc)
U
OPTICAL
OUT
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
O
Auxiliary device
OUT IN
VIDEO
AUDIO (L)
AUDIO (R)
To AUDIO OUT (L/R)
A
To AV IN AUDIO (L/R)
Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector.
AUDIO IN connection (D)
Connect a output of portable device (MP3 or PMP etc) to the AUDIO input connector.
MONITOR |
| INPUT |
|
| L - AUX - R |
Y | P | P |
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
Rear of DVD/CD Receiver
USB connection (U)
Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1.Choose a different function mode or press STOP (x) twice in a row.
2.Remove the USB device from the unit.
Notes:
Don’t extract the USB device while operating. Music files (MP3/WMA), image files (JPEG) and video files can be played.
This unit cannot use a USB HUB. Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multimedia Card (MMC), Memory Stick Pro
-Compatible with: FAT16, FAT32
-Only use the memory cards recommended. Devices which require additional program installation when you have connected the unit to a computer are not supported.
In case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive are supported. If there is an extension partition, it will not be supported.
If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the initial menu after you select a folder, press RETURN.
Digital cameras and mobile phones are not supported.
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector.
| To AUDIO IN |
| D |
Portable device | To AUDIO OUT |
Antenna Connection
Connect the supplied FM/AM antenna for listening to the radio.
Connect the AM Loop antenna to the AM antenna connector.
Connect the FM Wire antenna to the FM antenna connector.
Notes:
To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire antenna. After connecting the FM Wire antenna, keep it as horizontal as possible.
AM Loop Antenna (supplied)
FM Wire Antenna (supplied)
MONITOR |
| INPUT |
| L - AUX - R | |
Y | P | P |
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
Installation and Setup
9