Using the Computer

Connecting the Display

1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand.

2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 1

3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. 2

Power Cord Signal Cable

Digital signal Analog signal

DVI D-sub

NOTE

This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.

User must use shielded signal interface cables (D- sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product.

Varies according to model.

Wall-outlet type

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

4. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.