LG Electronics M4710C manual Abnomal state Command z, ISM modeCommand j p

RS-232CControlling the Multiple Product

Transmission / Receiving Protocol

16. Abnomal state (Command : z)

▲ Abnormal State : Used to Read the power off status when Stand-by mode. Transmission

[k][z][ ][Set ID][ ][Data][Cr]

Data FF : Read

0 : Normal (Power on and signal exist) 1: No signal (Power on)

2 : Turn the monitor off by remote control

3 : Turn the monitor off by sleep time function

4 : Turn the monitor off by RS-232C function

6 : AC down

8 : Turn the monitor off by off time function

9 : Turn the monitor off by auto off function

Acknowledgement

[z][ ][Set ID][ ][OK][Data][x]

17. ISM mode(Command: j p)

▲

Used to select the afterimage preventing function.

Transmission

[j][p][ ][Set ID][ ][Data][Cr]

Data 1 : Inversion

2 : Orbiter

3 : Orb.+Inv.

4 : White Wash

8 : Normal

Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

A11