Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate or the interchange device.

1. Place the monitor with its front facing downward on a soft cloth.

2. Separate the stand after firstly separating 4 screws by using a driver as figure.

3. Install the Wall mount plate.

Wall mount plate (Separate purchase)

This is stand-type or will mount type and is connectable with Wall mount plate.

Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.

-Be sure to use screws and a wall mount that meet VESA standards.

- Using screws longer than those recommended might damage the product. - Using screws that do not meet VESA standards might either damage the product or result in it coming away from the wall.We will not be held responsible for any damage resulting from failure to follow these instructions.

<Please use VESA standard as a recommendation.> Mounting crew:

Interface pad thickness: 2.6mm

Screw : 4mm x pitch 0.7mm x length 10mm

Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores

A23