Satellite Radio Operation

JHD3510

Switching to Sirius Satellite Radio (Requires optional Sirius tuner)

Press the MODE button (4) to change the mode to Sirius radio mode.

Programming Channels

1.Select the channel you want to store in memory.

2.Press and hold a preset button (5-10) until the corresponding preset button number appears.

3.Repeat steps 1 and 2 to program additional channels.

Preset Recall

19Press one of the six preset buttons (5-10) to directly select a preset channel stored in the current band.

14Preset Scan

Press AS/PS (14) to scan stations stored in all three user-preset channel groups (SR1, SR2

17and SR3). The unit will pause for 10 seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached.

Preset Tuning

Press and hold the AS/PS button (14) to access Preset Tuning Mode. In Preset Tuning Mode, you can use the TUNE/SEEK << / >> buttons (18, 19) to access all 18 preset stations in sequential order. Press and hold the AS/PS button again to deactivate Preset Tuning Mode.

Alternate Display Mode

Press the DISP/SCROLL button (12) to change the display information between single and dual line text display. In dual line mode, both artist and title are available for viewing.

Accessing your Sirius RADIO ID

To display your Sirius radio ID, use the TUNE/SEEK << button to tune to channel “000”. The screen will display “Sirius ID” on the top bar with the SID displayed in the middle of the LCD screen. The Sirius radio ID is 12 characters long.

Press and hold the DISP/SCROLL button to scroll the Artist/Song Title information.

Satellite Signal Strength

The display will indicate satellite reception strength as shown below.

Selecting a Band

In Sirius mode, press the BAND/WB button (15) to access the Sirius user-preset channel groups in the following order: SR1, SR2, SR3.

Category Tuning

1.Press the S-MOD/ENTERbutton (2) to access Category mode.

2.While the category is flashing, press TUNE/SEEK << / >> buttons (18, 19) to choose a category.

3.Press the S-MOD/ENTERbutton to confirm category selection and tune to the first channel in the selected category. The category icon will stop flashing.

4.Press the TUNE/SEEK << / >> buttons (18, 19) to choose desired channels in that category. (The lowest channel number within the chosen category will always be the default first channel tuned.)

5.Press and hold the S-MOD/ENTERbutton to return to channel tuning mode.

Channel Up/Down Tuning

Press the TUNE/SEEK << / >> buttons (18, 19) to search for a channel. Press and hold the TUNE/SEEK buttons to fast search.

Storing Preset Channels

The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your favorite channels.

Signal Strength

Strength Display

No Signal

Weak

Good

Excellent

Channel Lock

While tuned to the channel to be locked, press and hold the MODE button (4) to access the Channel Lock function. “Enter Code” is displayed on the LCD. Using the 1-6 digit buttons, enter your 4-digit code (the default code is 1111). “Channel Locked” appears on the LCD, confirming that the channel has been locked. The next time the channel is sequentially accessed, the “Channel Locked” message will appear, followed by “Enter Code”. To retrieve the locked channel, enter your 4-digit code. To change the channel lock code, press and hold the PTY/TA button (13). Enter Current Code > New Code > Confirm. The LCD will display “New Code Stored”.