Jensen VM9215BT operating instructions Hardware Sub-menu Features, Nstc, Pal

VM9215BT

Hardware Sub-menu Features

If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit.

Setting	Options	Function
Color Select	White	This feature allows the user to select
		eight pre-defined LED colors for the
	Red
		front panel button illumination.
	Blue
	Green
	Yellow
	Purple
	AquaBlue
	SkyBlue
	Custom
Color Scan	On	The unit will “scan” the color spectrum to
		allow the user to select a color.
	Off
Color Custom	Red	This feature allows the user to tune the
		RGB colors of the LEDs to obtain an
	Green
		exact match for their vehicle.
	Blue
Camera In	Normal	Reverse the camera image as if looking
		through a rear-view mirror.
	Mirror
TFT Auto Open	On	The TFT panel automatically opens
		when the unit is turned on.
	Off	You must press the OPEN button to
		open the TFT panel.
	Manual	When the ignition is turned OFF, the
		TFT panel DOES NOT retract if it was
		previously out.
Video Input (Input	NSTC	The color signals are output in the
circuitry auto detects the		standard NTSC format.
video signal from the
	PAL	The color signals are output in the
Aux In source).
		standard PAL format.
	Auto	The color signal output is switched
		automatically based on the current
		video input signal - NTSC or PAL.

32