Jensen PADIN5 operation manual Wiring, Rear Radio Controls and Connectors

PADIN5

Wiring

Perform the following steps to install the radio using a wiring adapter (purchased separately):

1.Splice or crimp wires.

2.Attach wiring adapter to vehicle wiring harness.

3.Re-connect the battery negative terminal and test radio operation to confirm correct wiring.

DVDB01 Connector (DVD Player Sold Separately)

Jensen Connector

1

2

Rear Radio Controls and Connectors

1.MICROPHONE CONNECTIONS See “Using Microphones” on page 6.

2.IR CONNECTIONS

See “AUX IR and DVD IR Connections” on page 5.

3.RADIO IN LOW/HIGH SWITCH

•Select “LOW” when you are using low-level RCA radio input (RADIO LOW-IN).

•Select “HIGH” when using hi-level radio input (RADIO HI-IN).

4.RCA CONNECTIONS

•RADIO LOW-IN: Connect to the RCA output from your radio.

•AUX IN 1 and AUX IN 2: See “AUX RCA Connections” on page 5.

•AUDIO OUT: Connect to an additional amplifier.

5.HIGH LEVEL WIRING CONNECTIONS

See Table 1 on page 4 for specific wiring connections.

			5
		DVD IR
1	2	3	4

3