LG Electronics 20MP37A, 27MP37VQ, 27MC37HQ, 27MP37HQ, 24M37HQ, 24M37D, 24M37A, 27M37D, 22M37H Front Rear

	ASSEMBLING AND PREPARING 11
WARNING	Using the Kensington security system
	The Kensington security system connector is
When you adjust the angle, do not hold the
	located at the back of the Monitor set. For more
bottom of the Monitor set frame as shown on	information of installation and using, refer to the
the following illustration, as may injure your	manual supplied with the Kensington security
fingers.	system or visit http://www.kensington.com.
	Connect the Kensington security system cable
	between the Monitor set and a table.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor

screen can detach from stand base and injureNOTE your body.

The Kensington security system is optional.

You can obtain it from most electronics stores.

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

ENGLISH

Front Rear