LG Electronics 47WL10MS, 42WL10MS Screen image looks abnormal, After-image appears on the product

TROUBLESHOOTING 55

The screen image looks abnormal.

Problem	Resolution
Is the screen position wrong?	yy D-Sub analog signal - Press the "AUTO" button in the remote control
	to automatically select the optimal screen status that fits into the
	current mode. If adjustment is not satisfactory, use the Position OSD
	menu.
	yy See if the video card resolution and frequency are supported by the
	product. If the frequency is out of range, set to the recommended
	resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the	yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?	to automatically select an optimal screen status that fits into the
	current mode. If adjustment is not satisfactory, use the Clock OSD
	menu.
Horizontal noise appears or the	yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.	to automatically select an optimal screen status that fits into the
	current mode. If adjustment is not satisfactory, use the Phase OSD
	menu.
The screen is displayed	yy The proper input signal is not connected to the signal port. Connect
abnormally.	the signal cable that matches with the source input signal.

ENGLISH

After-image appears on the product.

Problem			Resolution
After-image appears when the	yy If you use a fixed image for a long time, the pixels may be damaged
product is turned off.	quickly. Use the screen-saver function.
	yy When a dark image is displayed on the screen after an image with
	high contrast (black and white or gray), this may cause image sticking.
	The image sticking will disappear after 2 or 3 minutes.
	This is normal for LCD screen.
	* Please avoid displaying images on the screen as shown below. It is
	recommended to display images with relatively high brightness.
		TIME		TIME
		17:00		17:00