JL Audio C5-653-XO, C5-653-08132010, C5-650cw C5-653 Specifications, Woofer Physical Dimensions

E

C 5-65

0cw

•

U.S.JPatLent

#A6,2 2U9, 90D2 • IAOsse

B

A

C

D

F

C5-653 Specifications:

Woofers: Cast Alloy Frame, Patented Elevated Frame Cooling	Included Components and Parts:
(U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor	• Two C5-650cw 6.50-inch (165 mm) Woofers
System, Mineral-Filled Polypropylene Cone, Butyl Rubber	• Two C5-400cw 4.0-inch (100 mm) Midrange Drivers
Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-	• Two C5-075ct 0.75-inch (19 mm) Tweeters
Profile, Symmetrical Roll Spider, Ferrite Magnet	• Two C5-653-XO Crossover Networks
	• Two Flush-Mount Tweeter Fixtures
Midrange Drivers: DMA-Optimized Motor System, Mineral-	• Two Surface-Mount Tweeter Fixtures
Filled Polypropylene Cone, Butyl Rubber Surround, 1-in. / 25	• Two Metal Spring Clips for Flush-Mount Tweeter Fixtures
mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll	• Two Metal Woofer Grilles with ABS Grille Trays

Woofer Physical Dimensions

Frame Outer Diameter (A)		6.52 in. / 165.5 mm
Grille Tray Outer Diameter (B)		6.76 in. / 171.7 mm
Magnet Outer Diameter (C)		3.54 in. / 90.0 mm
Frontal Grille Protrusion (D)		0.98 in. / 24.9 mm
Mounting Hole Diameter (E)		5.56 in. / 141.2 mm
	Mounting Depth (F)	2.54 in. / 64.6 mm

Midrange Physical Dimensions

Frame Outer Diameter (A)*	3.94 in. / 100.0 mm
Grille Tray Outer Diameter (B)	4.76 in. / 121.0 mm
Magnet Outer Diameter (C)	2.83 in. / 72.0 mm
Frontal Grille Protrusion (D)	0.83 in. / 21.1 mm
Mounting Hole Diameter (E)	3.625 in. / 92.1 mm
Mounting Depth (F)	1.62 in. / 41.1 mm
*Does not take into account Mounting Tabs
A
D		D
C
B	A
Tweeter Fixture Physical Dimensions	Flush-Mount	Surface-Mount
Fixture Outer Diameter (A)	1.75 in. / 44.5 mm	1.61 in. / 40.9 mm
Fixture Mounting Hole Diameter (B)	1.50 in. / 38.1 mm	N/A
Fixture Mounting Depth (C)	0.56 in. / 14.2 mm	N/A
Tweeter Frontal Protrusion (D)	0.36 in. / 9.1 mm	0.87 in. / 22.1 mm

Due to ongoing product development, all specifications are subject to change without notice.

Spider, Ferrite Magnet	• Two Metal Midrange Grilles with ABS Grille Trays
	• Two ABS Midrange Frame Adaptors and Flush-Mount Rings
Tweeters: 0.75 in. / 19 mm Silk Soft Dome	• Four Self-Adhesive JL Audio Nameplates for Grilles
RSR Variable-Angle Flush-Mount System, Ferrofluid Cooling	• Butyl Adhesive Putty for Woofer Grilles
and Damping, Neodymium Magnet	• Twenty #8 x 1.25 inch (32 mm) Sheet Metal Screws
	• Sixteen #8 Mounting Clips
Crossover Networks: 3-way network with 2nd order	• Eight #6 x 1.25 inch (32 mm) Sheet Metal Screws
low-pass, 2nd order bandpass and 2nd order high-pass circuit,	• Eight #6 Mounting Clips
premium capacitors and inductors, 4-position adjustable	• Two 1.18-inch (30 mm) Machine Screws
tweeter output level, 3-position midrange presence control,	• Four #6 x 1-inch (25 mm) Sheet Metal Screws
Polyswitch tweeter protection	• Sixteen Crimpable Spade Connectors
	• Four 6.4 mm Female Crimpable Connectors
Continuous Power Handling: 75 Watts (RMS Method)	• Six 4.7 mm Female Crimpable Connectors
Peak Music Power: 225 Watts	• Two 2.8 mm Female Crimpable Connectors
Recommended Power Range: 25-150 Watts (RMS)	• Four 2.8 mm Male Crimpable Connectors
Frequency Response: 48 Hz - 25 KHz (± 3 dB)
Efficiency @ 1W/1m: 89.5 dB @ 1W/1m
Nominal Impedance: 4 ohms

A	C
	B
	Crossover Network Physical Dimensions
Height (A)	5.86 in. / 148.9 mm
Width (B)	4.17 in. / 105.8 mm
Depth (C)	1.68 in. / 42.8 mm

Due to ongoing product development, all specifications are subject to change without notice.

2 JL Audio - C5-653 Owner’s Manual 3