C5-525x Specifications

Woofers: Cast Alloy Frame, Patented Elevated Frame Cooling	Included Components and Parts:
(U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor	• Two C5-525x 5.25-inch (130 mm) Coaxial Speakers
System, Mineral-Filled Polypropylene Cone, Butyl Rubber	• Two C5-525x-XO Crossover Networks
Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-	• Two Metal Woofer Grilles with ABS Grille Trays
Profile, Symmetrical Roll Spider, Ferrite Magnet	• Two Self-Adhesive JL Audio Nameplates for Grilles
	• Butyl Adhesive Putty for Woofer Grilles
Tweeters: 0.75 in. / 19 mm Silk Soft Dome	• Twelve #8 x 1.25 inch (32 mm) Sheet Metal Screws
Ferrofluid Cooling and Damping, Neodymium Magnet	• Eight Mounting Clips for Woofer Mounting
	• Two 6.4 mm Female Crimpable Connectors
Crossover Networks: 2-way network with 2nd order	• Four 4.7 mm Female Crimpable Connectors
low-pass and 2nd order high-pass circuit, premium Mylar®	• Two 2.8 mm Female Crimpable Connectors
capacitors, air-core inductors, 4-position adjustable tweeter	• Twelve Crimpable Spade Connectors
output level, 3-position midrange presence control,
Polyswitch tweeter protection
Continuous Power Handling: 75 Watts (RMS Method)
Peak Music Power: 225 Watts
Recommended Power Range: 25-150 Watts (RMS)
Frequency Response: 53 Hz - 25 KHz (± 3 dB)
Efficiency @ 1W/1m: 88.5 dB @ 1W/1m
Nominal Impedance: 4 ohms

Due to ongoing product development, all specifications are subject to change without notice.

C5-525x SPECIFICATIONS