JL Audio owner manual C2-570x Specifications, Getting Started, Speaker Placement Considerations

Page 3

C2-570x Specifications:

Woofer: Injection-molded, Mica-filled, Polypropylene Cone, Butyl Rubber Surround, 1 in. Voice Coil on Kapton® Former, Flat, Symmetrical Roll Spider, Ferrite Magnet

Tweeter: 0.75 in. (19 mm) Silk Dome, Ferrofluid Cooling / Damping, Neodymium Magnet

Crossover: Natural Roll-Off Low-Pass, 1st Order High-Pass Filter with Electrolytic Capacitor

Continuous Power Handling: 60 Watts

Recommended Amp Power: 15-100 Watts per channel (RMS)

Efficiency: 90.5 dB @ 1W/1m 96.5 dB @ 1W/0.5m

Sensitivity: 93.5 dB @ 2.83V/1m

Nominal Impedance: 4 ohm

Frequency Response: 53 Hz - 22 KHz ± 3 dB

Included Components and Parts:

Two C2-570x 5 x 7-inch (125 x 180 mm) Coaxial loudspeakers

Two Woofer Spacer Gaskets

Eight #8 x 1 1/4-inch (30mm) sheet metal screws

Eight Mounting Clips

Two 5.2 mm female crimpable connectors

Two 2.8 mm female crimpable connectors

GETTING STARTED

•Turn off the audio system. It is also advisable to disconnect the negative (–) terminal of your vehicle’s battery whenever performing installation work.

•Before cutting, drilling or inserting any screw, check clearances on both sides of the planned mounting surface. Also check for any potential obstacles, such as window tracks and motors, wiring harnesses, etc. Check both sides of the

vehicle, many vehicles are not symmetrical!

•Always wear protective eyewear.

SPEAKER PLACEMENT CONSIDERATIONS

In most cases, your speakers will be placed into factory speaker locations. If you have some speaker mounting flexibility, keep the following in mind:

Lower mounting locations, such as the lower front corner of a door or a kick-panel provide the greatest path length distances for the sound emitted by the speakers. For this reason, they are generally more desirable than higher mounting locations. Higher mounting locations will usually result in extreme near-side soundstage bias which compromises the stereo listening experience.

3

Image 3
Contents 7-inch 125 x 180 mm Coaxial Loudspeakers Woofer Physical Dimensions C2-570x Specifications Speaker Placement ConsiderationsGetting Started Spacer gasket has been included to Speaker InstallationPage Page Page International Warranties Limited Warranty Automotive Speaker Systems USAIf you need service on your JL Audio product JL Audio, Inc

C2-570x-06112008, C2-570x specifications

The JL Audio C2-570x is a remarkable 5x7-inch component speaker set designed for car audio enthusiasts seeking an upgrade in sound quality and clarity. Introduced in 2008, the C2-570x has continually impressed users with its robust construction, advanced materials, and precise engineering, underlining JL Audio's commitment to delivering exceptional audio performance.

One of the standout features of the C2-570x is its high-performance woofer, which is constructed from polypropylene that offers an excellent combination of rigidity and lightweight performance. This innovative material allows the woofer to produce deep, thumping bass while maintaining accuracy and clarity across the audio spectrum. The speaker system is designed to handle up to 60 watts RMS power, providing a dynamic and rich sound experience even at high volumes.

The C2-570x also includes a durable, butyl rubber surround that contributes to its longevity and ability to withstand the rigors of car environments. This surround ensures that the woofer cone maintains its motion and provides a consistent and reliable sound output over time. Complementing the woofer is a 0.75-inch silk dome tweeter, which delivers smooth high-frequency reproduction, ensuring that vocals and instruments are heard with pristine detail and openness. This combination creates a balanced sound profile that satisfies a wide range of musical genres.

Another technological highlight of the C2-570x is its integrated crossover network, which effectively divides frequencies between the woofer and tweeter. This feature assures that each component performs optimally within its designated frequency range, reducing distortion and enhancing overall audio fidelity. The well-engineered crossover ensures a seamless blend of sound, allowing for a comprehensive listening experience that is both engaging and enjoyable.

Moreover, the speaker's design incorporates a removable mounting adapter that provides flexibility during installation, making it compatible with a variety of vehicle models. This thoughtful engineering decision enhances user experience, allowing for a straightforward installation process without sacrificing sound quality.

In summary, the JL Audio C2-570x component speaker system proves itself as a powerful upgrade for any car audio system. With its advanced materials, durable construction, high-efficiency design, and focused engineering, it provides users with a beautiful mix of rich lows and crisp highs, transforming every drive into an immersive auditory experience. Whether you are an audiophile or just an everyday music lover, the C2-570x offers a commendable solution for enhanced automotive sound.