JL Audio owner manual Woofer Physical Dimensions, Subwoofer Parameters, ZR800-CW Specifications

Page 2

 

B

 

D

E

A

 

F

 

C

Woofer Physical Dimensions

Frame Outer Diameter (A)

8.26 in. / 209.8 mm

Grille Tray Outer Diameter (B)

8.49 in. / 215.6 mm

Magnet Outer Diameter (C)

4.54 in. / 115.3 mm

Frontal Grille Protrusion (D)

1.17 in. / 29.7 mm

Mounting Hole Diameter (E)

7.125 in. / 181.0 mm

Mounting Depth (F)

3.39 in. / 86.0 mm

Subwoofer Parameters

ZR800-CW

Free Air Resonance (Fs):

46.27 Hz

Electrical “Q” (Qes):

0.702

Mechanical “Q” (Qms):

11.667

Total Speaker “Q” (Qts):

0.662

Equivalent Compliance (Vas):

0.787 ft3 / 22.29 litres

One-way, Linear Excursion (Xmax)*:

0.34 in. / 8.6 mm

Efficiency (1W/1m)**:

87.0 dB SPL

Effective Piston Area (Sd):

33.34 in2 / 0.0215 m2

DC Resistance (Re):

3.935 ohm

Nominal Impedance:

4 ohm

Infinite Baffle Use:

Yes

Enclosure Use:

Yes (Sealed & Ported)

Power Handling (continuous):

125W

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

**Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder” !

ZR800-CW SPECIFICATIONS

Cast Alloy Frame

Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902) DMA-Optimized Motor System

Mineral-Filled Polypropylene Cone

Santoprene Surround

1.75-in. / 44 mm Voice Coil Kapton® Former Progressive Roll Spider Ferrite Magnet

Precision-Built in Miramar, Florida - USA

Continuous Power Handling (Pt): 125W

(RMS Method)

Peak Music Power: 225 W

Recommended Power Range: 75-150W (RMS)

Frequency Response: 50 Hz - 500 Hz (± 3 dB)

Included Components and Parts:

One ZR800-CW 8.0-inch (200 mm) Woofer

One Metal Woofer Grille with ABS Grille Tray

One Self-Adhesive JL Audio Nameplate for Grille

Butyl Adhesive Putty for Woofer Grille

Eight #8 x 1.25 inch (32 mm) Sheet Metal Screws

Eight Mounting Clips for Woofer Mounting

One 6.4 mm Female Crimpable Connectors

One 4.7 mm Female Crimpable Connectors

2

JL AUDIO ZR800-CW

A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e .

Image 2
Contents N e r ’ s m a n u a l Subwoofer Parameters Woofer Physical DimensionsZR800-CW Specifications Infinite Baffle Application InformationBass speaker or as a full woofer Enclosed OperationGetting Started Speaker InstallationConnect the speaker wires, observing Always wear protective eyewearDiagram a Typical Woofer Installation 155 Enclosure SpecificationsDriver Driver Recommended Ported DesignMedium Gray Minimum If you need service on your JL Audio product North Commerce Parkway, Miramar, FL

ZR800-CW specifications

The JL Audio ZR800-CW is a premium 8-inch subwoofer designed to deliver exceptional bass performance with remarkable clarity and power. This subwoofer is engineered for audiophiles who demand a high level of sound quality from their car audio systems. One of the distinguishing features of the ZR800-CW is its incredible power handling capability. It can handle up to 1,500 watts of peak power, which allows it to produce deep, thunderous bass without distortion.

The subwoofer employs a unique patented design known as the "Conventional Woofer" architecture, which ensures that the driver operates efficiently and effectively across a wide frequency range. This design minimizes distortion and maximizes output, making it ideal for both music enthusiasts and casual listeners alike. The ZR800-CW features a heavy-duty cast aluminum frame that provides structural integrity and rigidity, essential for reducing unwanted vibrations that can affect sound quality.

Another significant characteristic of the ZR800-CW is its advanced motor design. The subwoofer includes a high-temperature voice coil, which aids in heat dissipation, allowing for longer play times without compromising performance. This durability is enhanced by the use of a specially formulated thermal adhesive that helps maintain the integrity of the coil under extreme conditions.

The ZR800-CW also utilizes an innovative cone assembly crafted from strong and lightweight materials. This construction not only contributes to its responsiveness but also ensures that the subwoofer maintains accurate bass reproduction throughout its listening range. The integrated dust cap and the specially designed surround further enhance the longevity of the subwoofer while also improving its overall performance.

To top it off, the JL Audio ZR800-CW is designed for versatility in installation, fitting into various vehicle types and audio configurations. Its striking aesthetics, along with premium build quality, make it not just a performance component but also an appealing addition to any audio system. The JL Audio ZR800-CW subwoofer stands out in the market for its combination of high power handling, excellent build quality, and superior sound performance, making it a top choice for serious audiophiles looking to elevate their in-car listening experience.