JL Audio SB-T-TUNDC/8W7/BK Remove the bolt that secures the seat belts to the floor, E P 1

S T E P 4

Remove the bolt that secures the seat belts to the floor.

S T E P 5

Place a supplied lock washer and then flat washer onto each supplied hex bolt.

Place a supplied L-bracket onto each bolt assembly. The bolt assembly is to pass through the hole on the longer side of each L-bracket.

Secure a L-bracket to the left side of the Stealthbox®.

S T E P 6

Secure the other L-bracket to the right side of the Stealthbox®.

S T E P 7

Run speaker wire from the amplifier’s location to the Stealthbox® location and check for proper operation of the woofer.

SB-T-TUNDC/8W7_INSTR_SKU#011247

S T E P 8

Place the Stealthbox® into the mounting area.

S T E P 9

Lift the rear seating up and slide the Stealthbox® under the seating. The woofer and port faces the rear of the truck.

When placing the rear seat back down. Make sure that the hooks that are located on the backside of the seat is aligned with the hooks on the rear wall. If these hooks do not align, then the rear seating will not function correctly.

S T E P 1 0

Using the factory bolt that was removed in STEP 3, secure the rear seat mount to the bulkhead.

S T E P 1 1

Using the factory bolt that was removed in STEP 3, secure the L-bracket and the rear seat mount to the floor.

Page 2 • JL Audio, Inc 2007 Continued on Next Page