JL Audio SB-N-MURAN/10W1v2 Cont From Previous, Make sure that the harness is not under the woofer

Page 2

Cont.

From

Previous

Page

➔ ➔ ➔ ➔

STEP 7: There is a large L-bracket that is already mounted to the rear of the Stealthbox®.This L- bracket needs to be unmounted, flipped around and remounted.The picture above shows the large L- bracket properly mounted, with the woofer facing down.

STEP 8: a)Place a supplied 3/8” lock washer and 3/8” flat washer onto a 3/8”-16x1-1/4” hex bolt. Using this bolt assembly, secure the supplied small L-bracket onto the front of the Stealthbox®, as is in the picture above.

b)With the Stealthbox® placed into the cargo area. Run speaker wire from the amplifier location to the Stealthbox’s® wire terminal and secure.

STEP 9: Place the Stealthbox® into position.The speaker terminal needs to face to the front of the vehicle.

Position the factory wiring harness around the out- side of the front right corner of the Stealthbox®.

STEP 10: Tuck the rear of the factory harness under the right rear corner.The harness needs to pass between the woofer and the rear L-bracket.

*Make sure that the harness is not under the woofer*.

➔ ➔

➔

L-BRACKET FROM STEALTHBOX

VEHICLE'S FLOOR

FLAT WASHER

HEX NUT

HEX HEAD BOLT

➔

FLAT WASHER

 

➔

 

FENDER WASHER

 

LOCK WASHER

 

➔

➔

STEP 11: To access this mounting location; enter the vehicle via the driver’s side rear passenger door, lift up the flooring that is laying on the second row seat.

Place a supplied 1/4” Flat Washer onto the 8mmx35mmx1.25” Hex Bolt.

Line up the angle bracket mounting hole to the fac- tory bolt hole. Place the bolt assembly through the angle bracket and thread into the factory bolt hole. Do not tightly secure.

STEP 12: With Stealthbox loosely mounted in the front, use the rear L-bracket mounting hole as a drill guide.

*CAUTION*

Before drilling, make sure that you are not going to be drilling into any gas lines, brake lines, transmission lines, electrical wiring or anything else that might cause a reduction in your weekly pay. Always wear eye protection when drilling.

With the use of a 3/8” drill bit and drill. Drill out the floor.

STEP 13: With the supplied hardware, place a 3/8” Flat Washer onto the 3/8” hex bolt. Place the bolt assembly through the angle bracket and drilled hole, from inside the vehicle.

From the underside of the vehicle, place a

3/8” Fender Washer, 3/8” Flat Washer, 3/8” Lock Washer and the 3/8”-16 Hex Nut onto the pro- truding bolt. Secure tightly.

Now, tightly secure the front mounting bolt assem- bly, from STEP11.

STEP 14: Not pictured: Place the spare tire, hardboard and hold down wing threaded rod back into place.

The picture above is the under side of the driver’s side rear cargo pocket floor, that was removed in STEP2.

Remove the three positing tabs, indicated by the white arrows.

Continued on Next Page ➔

w w w . j l a u d i o . c o m

SB - N - MURAN/10W1v2, JL AUDIO, Inc 2006

Pag e 2

Sheet SKU#011197 Revision1/18/2006

Page 1 Page 3
Image 2
Page 1 Page 3
Contents For StealthboxSB-N-MURAN/10W1v2 Up Nissan MuranoCont From Previous Make sure that the harness is not under the woofer16x1-1/4 Hex Bolt Included HardwareUSS Flat Washer Split Lock Washer

VR690-CXi, SB-N-MURAN/10W1v2 specifications

The JL Audio SB-N-MURAN/10W1v2 and VR690-CXi are two outstanding products from one of the leading names in high-performance audio systems, catering to enthusiasts who demand exceptional sound quality from their vehicles.

The SB-N-MURAN/10W1v2 is a custom-fit subwoofer enclosure designed specifically for select models of the Jeep Wrangler. What sets this product apart is its sleek design that seamlessly integrates with the vehicle’s interior while maintaining cargo space. Housing a 10-inch W1v2 subwoofer, it delivers powerful bass that enriches any audio experience. The enclosure is constructed from high-quality MDF (medium-density fiberboard), ensuring rigidity and durability, which helps to minimize distortion while maximizing sound quality. The integrated subwoofer features a dual 4-ohm voice coil, providing flexibility in wiring options for optimal performance. Its ability to handle up to 300 watts RMS translates to deep, authoritative bass that can make music come alive.

On the other hand, the VR690-CXi is part of JL Audio's VR series, known for its impressive performance and build quality in coaxial speakers. These 6x9-inch speakers are engineered to deliver remarkable sound clarity and fullness, making them an ideal choice for car audio upgrades. They feature a 1-inch silk dome tweeter, which reproduces high frequencies with detail and richness, while the polypropylene cone woofer provides solid midrange and bass response. The speaker's sophisticated design includes a stamped steel frame that enhances durability and minimizes unwanted vibrations.

Further enhancing the listening experience, both products incorporate advanced technologies typical of JL Audio. These include sophisticated driver designs, precision-engineered components, and meticulous testing, all contributing to their standout performance. The SB-N-MURAN/10W1v2’s enclosure is optimized for efficiency and low-frequency response, while the VR690-CXi leverages proprietary technologies for a balanced sound profile.

In conclusion, the JL Audio SB-N-MURAN/10W1v2 and VR690-CXi combination represents a potent audio upgrade for any vehicle. With their impressive features, technologies, and characteristics, these products are tailored for those who seek an immersive audio experience on the road, merging powerful bass with clear highs to create a rich, dynamic soundscape. Whether for off-road adventures or daily commutes, these JL Audio offerings are designed to elevate the automotive audio experience significantly.
Top Page Image Contents