JBL CS2165C owner manual Connections, Specifications, To Amplifier

CONNECTIONS

Connect the tweeter using the supplied	Figure 5. Wiring connections
wire with inline crossover to the terminals
on the woofer. Note that there are two
positive and two negative terminals on
the woofer. Connect the unused positive
and negative terminals to your amplifier‘s
output leads, observing proper polarity.
You must use the supplied inline crossover.
Failure to do so may damage the tweeter.

To Amplifier

JBL, Incorporated

250 Crossways Park Drive, Woodbury, NY 11797 USA 516.255.4JBL (4525) (USA only) www.jbl.com

© 2006 Harman International Industries, Incorporated. All rights reserved.

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. I-Mount and Starfish are trademarks of Harman International Industries, Incorporated.

Part No. CS2165COM6/06

SPECIFICATIONS

	CS2165C
Type	165mm Two-way
	component system
Power Handling	45W RMS,
	135W Peak
Sensitivity (2.83V/1m)	91dB
Frequency	55Hz – 20kHz
Response
Impedance	4 Ohms
Mounting Depth	2-3/8" (61mm)
Cutout Diameter	5-11/16" (145mm)
Overall Diameter	6-9/16" (167mm)

GENERAL CARE

The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

This product is designed for mobile applications and is not intended for connection to the mains.

A valid serial number is required for warranty coverage.

Features, specifications and appearance are subject to change without notice. Not all models are available in all markets.

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours

72500 Château du Loir

France

declare in own responsibility that the product described in this owner’s manual is in compliance with technical standards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Klaus Lebherz

Harman Consumer Group International

Château du Loir, France 6/06

www.jbl.com