
Low-Impedance  Drop-In  Ceiling Speaker CSD2X2L(U)
SUPPORT RAIL  | SEISMIC  | Lead | Color | 
  | 
CROSSBAR INCLUDED  | 
  | |||
TETHER  | 
  | |||
(FOR USE WITHIN 2' X 4' TILE SPACE ONLY)  | POINTS (4X)  | +  | Red | 
  | 
  | COVER  | |||
  | 
  | |||
  | 
  | —  | Black | 
  | 
  | 
  | 
  | WIRE  | 
  | 
  | 
  | 
  | NUTS  | 
  | 
  | 
  | 
  | COVER  | 
  | 
FINELY PERFORATED  | 
  | 
  | WIRE  | 
  | 
  | 
  | NUTS  | 
  | |
METAL FINISH GRILLE  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | S P E C I F I C AT I O N S  | 
  | 
Frequency Response . . . . . . . . . . 85 Hz - 20 kHz SPL @ 1W / 1m . . . . . . . . . . . . . . . 94 dB Maximum Power . . . . . . . . . . . . . . 15 watts @ 
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . . 8" main cone with secondary high frequency cone
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)
Product Weight . . . . . . . . . . . . . . .12 lb.
Architect and Engineer Specifications
The speaker shall be a Bogen Model CSD2X2L(U) 
@1 watt /1 meter (min.). Frequency response shall be 85 Hz - 20 kHz (min.). The speaker shall have a 
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tiles. For 2' x 2' installations, a support rail shall not be needed and no cuts to the ceiling shall be necessary. For 2' x 4' installations, a single cut to the ceiling tile and an included support rail shall be needed. The speaker shall measure 
50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel: 
www.bogen.com
Specifications subject to change without notice.
©2008 Bogen Communications, Inc.