Marantz MM8003 manual Power Cable Connection, Using AC Outlets, Tips on Speaker Placement

Page 9

TIPS ON SPEAKER PLACEMENT

How the speakers should be placed depends on the room size and other factors. An example of how the speakers are normally placed and some placement tips are given here.

 

Surround R

 

Surround

 

Back R

Front R

 

Front

 

Center

 

 

Surround L

Front L

Surround

 

Back L

POWER CABLE CONNECTION

Connect the power cable after all the connections have been completed.

1. Plug the accessory power cable into the AC IN socket on the rear panel of the amplifier.

 

ENGLISH

 

 

 

 

 

 

USING AC OUTLETS

 

NAMES AND

FUNCTION

Power can be supplied from the amplifi er's AC outlet

(UNSWITCHED) to another component up to a

maximum power consumption of 150 W.

The amplifier's AC outlet is an UNSWITCHED

 

 

(unswitched) type, which means that the power can

 

 

be supplied at all times regardless of whether the

 

CONNECTIONS

amplifi er power is on or off.

BASIC

 

AC OUTLET

 

120V 60Hz

 

 

 

 

UNSWITCHED 1.25A150W

 

OPERATION

 

 

 

Warning:

 

 

• Front left and right speakers

It is recommended that the front left and right speakers be positioned at an angle of 45 to 60 degrees from each other as viewed from the listening position.

• Center speaker

This speaker is placed so that its front panel is in line with the front panels of the front left and right speakers or slightly behind them.

Height at which to place the front left and right speakers and center speaker

Place the three front speakers (left, right and center) so that their mid-range and high-range units will be positioned at more or less the same height from the floor as much as possible.

• Surround left and right speakers

These speakers are needed to play surround sound. Place them against the walls in line with the listening position or slightly behind it. Position them so that the center of the speaker front panels point toward the center the room.

• Surround back left and right speakers

Place these speakers behind the listening position as shown in the figure.

Height at which to place the surround left and right speakers and surround back left and right speakers

Place these speakers at a height of 70 cm to 1 meter above the listener.

By placing the speakers at this height, the sound source will not be localized at any specific position, and the listener will feel more surrounded and enveloped by the sound.

2. Connect the plug on the power cable to the wall socket (AC 120 V, 60 Hz).

*Ensure that the total power consumption of the amplifier and other components connected to the socket does not exceed the capacity of the socket.

Notes:

Insert the power plug firmly. Noise may be caused by an incomplete connection.

Do not connect the amplifier to the AC outlet of another product. Product malfunctioning may occur if the capacity of the AC outlet is exceeded.

Do NOT connect a component that exceeds the

 

absolute allowable power rating. Doing so may cause

ADVANCED CONNECTIONS

a fire and/or electric shock.

 

 

TROUBLESHOOTING

 

OTHERS

70cm1m

Note:

When placing speakers close to a TV set, use magnetically shielded speakers for the front left and right speakers and center speaker.

7

Image 9
Contents MM8003 Read Before Operating Equipment Additional Safety InformationIntroduction ContentsFeatures Front Panel Rear Panel Names and FunctionBasic Connections Remote Control ConnectionsPreparing the Connection Cables Balanced ConnectionsUnbalanced Connections AV8003 ConnectionsTurn the speaker connector clockwise to tighten it up Speaker ConnectionsSpeaker Cables Power Cable Connection Using AC OutletsTips on Speaker Placement Turning the Power OFF Turning the Power onPress the Power ON/STANDBY switch OperationAdvanced Connections BI-AMPLIFIER ConnectionsAV8003 Multi Zone Speaker Connections Advanced Operationtroubleshooting Others ConnectionsMulti Zone Speaker Multi Zone ConnectionsAV8003 and the Remote Control in connector on this amplifier Remote Control ConnectionsSignal Connections with External Control ComponentsTroubleshooting Resetting the AmplifierSymptom Cause Remedy Related Outside Dimensions SpecificationsCleaning of Equipment External Surfaces OthersIs a registered trademark
Related manuals
Manual 17 pages 5.67 Kb

MM8003 specifications

The Marantz MM8003 is a high-performance power amplifier designed to deliver an exceptional audio experience for home theater and audio enthusiasts alike. Known for its robust build quality and advanced features, the MM8003 stands out as an impressive addition to any audio setup.

One of the standout characteristics of the MM8003 is its ability to drive multiple channels with ease. The amplifier offers a multi-channel configuration, allowing it to power up to eight channels simultaneously. This makes it an ideal choice for creating a comprehensive home theater system that can handle immersive audio formats like Dolby Atmos and DTS:X, enhancing the overall cinematic experience.

The amplifier is built on Marantz's rich heritage in audio engineering, featuring a high-current design and quality components that ensure reliable performance. The MM8003 utilizes a sophisticated Class AB amplification topology, which combines the best of both Class A and Class B designs. This results in a rich, warm sound with minimal distortion, making it perfect for both music and movie playback.

The MM8003 boasts an impressive power output, delivering up to 150 watts per channel into 8 ohms. For users seeking even greater power, the amplifier can operate efficiently at 4 ohms, providing 200 watts per channel. This level of power makes it suitable for driving a wide range of loudspeakers, from bookshelf models to larger floor-standing units, ensuring dynamic and impactful sound reproduction.

Connectivity is another vital aspect of the MM8003. The amplifier includes a range of input options, allowing users to easily integrate it into their existing audio setups. With XLR balanced inputs and RCA inputs available, users can connect their source components with minimal noise interference. Additionally, the MM8003 is equipped with removable power cords, making it flexible and convenient for various home configurations.

Moreover, the Marantz MM8003 features advanced thermal management systems, ensuring that the amplifier remains cool even during prolonged use. This reliability and efficiency contribute to its durability and longevity, making it a worthy investment for audio enthusiasts seeking high-quality sound.

In summary, the Marantz MM8003 power amplifier is a robust, versatile audio solution that excels in multi-channel performance and sound quality. With its advanced amplification technology, powerful output, comprehensive connectivity, and efficient design, it is an ideal choice for those looking to elevate their home audio experience to new heights.