Lanzar Car Audio SD43MU Setting Audio Modes, Scroll Caption Adjustment, Rock, Aux

Basic Operation

Balance: R10 to L10

Adjust sound balance between left and right speakers by using VOL + / - . Fader: F10 to R10

Adjust sound balance between front and rear speakers by using VOL + / VOL - .

Setting Audio Modes

DSP	Touch the screen the DSP range
	(or press the EQ button on the
	front panel ) to select one of the
	preset sound modes

(Rock/Pop/Jazz/Classic/Flat) . The information will display in the monitor as follow :

POP		ROCK		JAZZ
FLAT				CLASSIC
		ROCK
SWF	LUD	DSP	CLK	MOD
	VOLUME-		SEL	VOLUME+

front panel to ahead/back (proceed/ cancel) , and then press the SETUP button briefly to confirm .

(Press it button longer again to renew . )

FM1 106.30 MHz

ST	DX
LUD	SWF POP DISC 11:08 AM

Alternate Audio/video Source

Following the diagram below, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.

1).Please connect the external device with stereo jack(black end) plug the Aux in socket of the unit .

2).Press the MOD button to select the AUX IN connection.

3).With the buttons on the external device to operate the item of the playing.

Headphones port

touch to select

It`s depend on your habit to select the Audio mode . Black

White

Scroll Caption Adjustment

In Radio mode:

You can adjust your desired scroll caption , the method of the operation as follow:

a). Press and hold the SETUP button (for about 2 seconds) on the remote control, the adjustment scroll bar will display on the screen .

b). Use the VOL+/- to select among of the “A, B, C ....X, Y, Z, and blank ”,

and use the / button on the

( connect cable)

	AUX IN
	SWF	POP		DISC		11:08 AM
SWF	LUD	DSP	CLK			MOD
	VOLUME-		SEL		VOLUME+

touch to select

18