Operation

•Console

When all the connections is finished, turn the unit on, switch the mode to navigation mode, the unit will enter the following interface automatically.

Note: If you have set “Auto navigation when power on”, when you turn on the unit, it will skip Console interface and enter navigation interface automatically.

Tap Agree, the following interface will appear, tap Quit will return to Console interface.

• Setting

Tap icon on Console interface to enter Setting interface like followed:

1)Use remote control to select icon and enter screen adjust mode, you can see the following interface displayed on screen. Use remote control to move the screen up/down, left/ right. Then press OK button on remote control to

confirm the screen adjustment.

2)Tap to enter screen calibration mode, and you can see a plus displayed on screen. Tap the plus firmly, the plus will continue to move until the screen is aligned. And “OK” will appear on screen, tap OK will exit screen calibration mode.

3)Tap to enter GPS Monitor interface, it is for factory testing.

4)Tap to enter Navi Option interface.

Tap check box to enable “Auto run navigation when power on”. When you select “Auto run navigation when power on”, every time when you turn the unit on, it will enter navigation mode automatically.

5)Tap to enter Language Option

menu. You can select system language in this menu.