Kicker DS6.2 DS65.2 DS68.2 manuel dutilisation + +

Page 3

Crossover in 2-way conﬁguration One component set per channel

• At least two ampliﬁ er channels are needed for stereo operation (only one channel is shown)

woofer

+

-

Set the tweeter output-level switch to 0 dB, +3 dB, or +6 dB. Higher switch settings will result in more volume from the tweeter.

-

source unit / ampliﬁ er

+

tweeter

-

crossover

IN +

-+

OUT

Crossover in 2-way conﬁguration Two component sets per channel

•Requires two complete DS systems (four woofers, four tweeters, four crossovers)

•At least two ampliﬁ er channels are needed for stereo operation (only one channel is shown)

•Crossovers wired in parallel

tweeter

woofer	-
+	-
OUT
MID

crossover

+ +

OUT

TW

-	woofer
-	+
	OUT
	MID

crossover

- IN +

- IN +

- OUT +

source unit / ampliﬁ er

3

2011 DS Components Multilingual f01.indd 3

8/10/2010 11:23:26 AM

Image 3

Contents DS Component System Performance WiringModel DS Component System+ + Woofer Mounting Tweeter Mounting Flush MountingAngle Mounting Surface MountingCrossover Mounting What to do if YOU Need Warranty or Service Acoustics Limited WarrantyModelo DS6.2 DS65.2 DS68.2 ModeloComponentes DS RendimientoUnidad fuente / ampliﬁ cador Tweeter Ltre passif Montaje DEL Woofer Montaje DEL Tweeter Montaje al rasUnidad fuente Montaje DEL CrossoverModell DS6.2 DS65.2 DS68.2 DS-KOMPONENTEN System ModellDS Komponenten LeistungQuelle / Verstärker Hochtöner Frequenzweiche WOOFER-EINBAU AbbEinbau Hochtöner Abb Bündiger EinbauEinbau mit Winkelringen Abb Einbau auf der OberﬂächeCROSSOVER-EINBAU Modèle DS6.2 DS65.2 DS68.2 DS Composants SystemComposants DS PerformancesSur 0 dB, +3 dB, or +6 dB. Des Montage DU Woofer Montage DU Tweeter Montage encastréMontage AngulaireMontage DU Filtre Passif Garantía Internacional Versión Español International WarrantyStillwater Designs