Vacuum Flourescent Display VFD, Mounting

Vacuum Flourescent Display (VFD)

KEYPAD

Using the existing DIN opening or the one you just created, slide the Metal DIN Mounting Cage into the opening.

Here is a brief description of the indicators found on the VFD:

 - Indicates the WXRC and/or WX Series amplifier controls are locked out and not usable.

 - Indicates you are in the System Menu

 - Indicates you are in the mute menu or the mute function is active.

 - Indicates you are in the gain menu.

 - Indicates you are in the equalizer menu.

 - Indicates you are in the low pass filter menu.

 - Indicates you are in the high pass filter menu.

 - Indicates you are in the phase menu.

 - Indicates you are in the LIMITER menu.

 - Memory preset 1 activated or stored.

 - Memory preset 2 activated or stored.

 - Memory preset 3 activated or stored.

 - Memory preset 4 activated or stored.

Here is a brief description of the soft touch buttons.

 - Used to select memory preset 1 or to store current settings into memory preset 1.

 - Used to select memory preset 2 or to store current settings into memory preset 2.

 - Used to select memory preset 3 or to store current settings into memory preset 3.

 - Used to select memory preset 4 or to store current settings into memory preset 4.

 - Used to exit the current menu.

 - Used to enter the selected menu.

 - Used to return to the Main Menu and other functions explained

later in this manual.

 - Used to advance up through menu selections and/or adjust WXRC and amplifier controls.

 - Used to advance down through menu selections and/or adjust WXRC and amplifier controls.

Secure the Cage by bending the Mounting Tabs on the sides, top and bottom of the Cage using a small flat-blade screwdriver. Use only the tabs that when bent will secure the Cage to the Mounting Surface.

Side View

Top and Bottom View

Next, place the Plastic Cosmetic Trim Ring into the Metal DIN Mounting cage. There are two plastic retainers in the Trim Ring (one on top and one on bottom) that will snap into place.

Once in place, use the 2 supplied M3 flathead screws to secure the Trim Ring to the Metal Cage.

The WXRC Control Head is held in place by two clips (one on each side) of the Plastic Trim Ring.

MOUNTING

These controls and their usage will be explained later with more detail in each menu usage section

Mounting

DIN Mounting

Using the supplied hardware you can mount the WXRC into a standard DIN sized opening.

Be sure you will have a minimum of 2” (51 mm) clearance depth behind your mounting surface panel to mount the WXRC.

If not using an existing DIN opening, you will first need to cut an opening that is 7-3/16” (182 mm) by 2-1/8” (53 mm) into your mounting surface panel.

It is VERY important that you DO NOT make the hole any larger than the specified dimensions. If you make the opening too large then the mounting cage will not work properly.

Press the WXRC control head in to the assembly until it locks into place. Your WXRC Control Head is now mounted and you can move on to the wiring section of this manual

Route the WXRC Control Head cable through one of the openings in the Trim Ring/Metal Cage assembly to your WXRC Interface Box location.

WXRCREMOTECONTROL

08WXRC, WXRC specifications

The Kicker WXRC and 08WXRC series represent a blend of innovative audio engineering and rugged design, tailored specifically for passionate car audio enthusiasts. These subwoofers are designed to deliver deep, resonant bass that can transform any vehicle into a mobile sound stage.

One of the main features of the Kicker WXRC subwoofers is their custom, high-output woofer cone. Constructed with a durable injection-molded polypropylene, the cone not only ensures longevity but also enhances the clarity and punch of the sound produced. This design minimizes distortion and allows for a more powerful low-frequency output, providing listeners with the immersive experience they crave.

The technology behind the Kicker WXRC includes a high-temperature voice coil, which allows the subwoofers to handle increased power levels without overheating. This is crucial for users who enjoy playing their audio at loud levels, as it ensures reliability and performance throughout extended listening sessions. The dual voice coil configuration offers flexible wiring options, allowing the subwoofers to be easily integrated into various audio setups.

Another notable characteristic of the Kicker WXRC series is its robust enclosure design. The subwoofers are engineered to work optimally in a variety of enclosure types, including sealed or ported configurations, making them versatile for different sound preferences. The enclosures are often constructed with high-grade MDF for added durability and reduced resonance, ensuring that the sound remains clean and powerful.

The Kicker WXRC and 08WXRC subwoofers are also equipped with advanced cooling technologies. Their unique venting system allows air to flow freely over the voice coil, reducing the risk of thermal build-up during intense play. This means that users can enjoy high volumes without compromising the quality of their audio.

In terms of installation, the Kicker WXRC subwoofers come with a variety of mounting options, ensuring compatibility with a wide range of vehicles. Their sleek design and customizable features make them an attractive choice for anyone looking to upgrade their sound system.

Overall, the Kicker WXRC and 08WXRC subwoofers are designed to deliver exceptional bass performance in a reliable, robust package. With their impressive features, advanced technologies, and commitment to sound quality, these subwoofers stand out as a top choice for car audio enthusiasts seeking to elevate their listening experience.