Bogen V150, V60, V100, V250 specifications Power Vector Rear Panel

Page 5

Panel Descriptions

Power Vector Rear Panel

1.AC Receptacle

A grounded, unswitched AC convenience receptacle with a 500W maximum capacity is provided for external equipment.

2.AC Line Cord and Circuit Breaker

A grounded, 3-wire AC line cord provides power to the amplifier and is protected by a resettable circuit breaker.

3.Trans Output / Direct Out Selector

Allows selection of either transformer-coupled outputs (70V, 25V, and 8-ohm) or a direct low-impedance (4-ohm minimum) output. A locking device is included to avoid accidental switching.

4. Speaker Output Barrier Strip

A 5-position barrier strip, with clamping washers, provides connections for speaker loads.

5. Mute Control Terminals

Provides access to mute buses for external control and system expansion.

6. Remote Volume Control Terminals

Three terminals are provided for connection of a remote station to control the amplifier’s motorized Master Volume Control.

7. Low-Cut Switch

A slide switch (located in module bay 6) that allows roll off of frequencies below 125 Hz.

8.Tone Control Bypass Switch

A slide switch (located in module bay 6) that allows the effects of the bass and treble controls to be bypassed.

9. Module Bays

The amplifier has eight module bays, all of which can accommodate input modules, with two bays (bays 7 and 8) that can accommodate either input or output modules.

10. Bridging Jack

An RCA connector that allows the bridging of Power Vectors together for system expansion.

11. Pre-EQ Output

An unbalanced RCA buffer output whose signal includes all volume controls, tone controls, and output module signal processing, but before (pre-EQ) any external signal-processing equipment connected to the Signal- Processing Insert jacks.

12. Insert Jacks

A pair of RCA connectors allow external equipment to be inserted between the pre-amp output and the power amp input. Inserting a plug into the jack labeled “IN” automatically breaks the internal connection between the amplifier’s pre-amp section and power amp section.The insert connections are unbalanced.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Power Vector Amplifiers V35, V60, V100, V150, & V250 Models Important Safety Information Contents Panel Descriptions Power Vector Front PanelPower Vector Rear Panel Package Contents InstallationModule Installation Ventilation and MountingOutput Modules ModulesInput Modules FunctionalitySpeakers ConnectionsTransformer-Coupled Speaker Connections Ohm Low-Impedance Speaker ConnectionsSignal-Processing Inserts Remote Volume ControlPre-EQ Output COM and GND TerminalsBridging System Expansion of Power Vector AmplifiersMute Control Operation Front Panel Controls & IndicatorsRear Panel Controls Load Selector SwitchBlock Diagram Specifications LED TroubleshootingAccessories Warranty

V250, V100, V150, V60 specifications

Bogen has established itself as a trusted name in the field of telecommunication and public address systems, especially with their V series of amplifiers, including the V100, V60, V150, and V250 models. Each of these units showcases Bogen’s commitment to quality, durability, and innovation.

The Bogen V100 is designed for smaller installations, ideally serving schools and small offices. It features a compact design with a power output of 100 watts, making it sufficient for environments that require clear sound without overwhelming amplification. The V100 incorporates features like a built-in mixer with multiple microphone inputs, allowing users to connect different audio sources simultaneously. Its user-friendly interface and straightforward controls make it accessible to those without extensive technical knowledge.

Next in the lineup is the Bogen V60. This amplifier offers enhanced versatility while maintaining a compact footprint, suitable for a variety of applications. With a power output of 60 watts, the V60 is perfect for classrooms, conference rooms, or smaller venues. It features an integrated RCA input, allowing for easy connection to external audio sources such as CD players or computers. The unit also supports a range of speaker configurations, making it adaptable for different audio setups.

The V150 model ramps up the power to deliver 150 watts, catering to mid-sized venues that require greater amplification. It boasts robust build quality and advanced circuitry designed for superior signal processing and clarity. The V150 supports both line-level and microphone-level inputs, providing flexibility for various audio requirements. Additionally, features like built-in EQ controls allow for sound customization to suit specific environments, enhancing audio output.

For larger installations, the Bogen V250 is the powerhouse of the series, delivering 250 watts of output. It is engineered for environments that demand high-performance public address systems, such as auditoriums and large conference areas. The V250 is equipped with advanced thermal protection and overload circuitry to ensure reliability during prolonged use. This model can support multiple zones, enabling complex audio needs across expansive spaces. Furthermore, its compatibility with various accessories makes it a versatile choice for integrators.

All four models in the Bogen V series reflect a blend of superior technology, thoughtful design, and practical features, making them stand out in their category. Bogen amplifiers are known for their reliability and efficiency, ensuring that whether for a small classroom or a large auditorium, users can always count on crystal clear audio performance. With options to suit different power requirements and configurations, Bogen continues to be an industry leader in public address and sound system solutions.
Top Page Image Contents