M4100CDUM.qxd 07/24/03 4:29 PM Page 3
Location and Function of Control at a Glance
9. Multi-Function Button 4/RPT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio Operation for more information).
CD: Enters CD track repeat mode (See CD Operation for more information).
10. Multi-Function Button 5/RDM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio Operation for more information).
CD: Plays all tracks on the current disc in random order (See CD Operation for more information).
11. Multi-Function Button 6/INT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio Operation for more information).
CD: Plays the first 10 seconds of each track on the current disc (See CD Operation for more information).
12. AS/PS/Elapse Button:
Radio: Automatic memory storing and preset scan (See Radio Operation for more information).
CD: Displays elapsed time of current CD track.
13.Open Button: Access the CD slot, or allows the removal of the detachable face.
14.Play/Pause and Mute Button:
Radio/Aux In: Mutes audio level.
CD: Pauses the CD player.
15.Eject Button: Ejects the disc from the CD Slot when the front panel is open.
16.Display Button: Displays either the clock, radio station or track number. (See setting the clock for more information).
17.Band Button: Selects the radio band in the following order: FM1, FM2, AM, WX.
18.Loud Button: Enhances sound quality by boosting the bass and treble tones.
DIM Button: Adjusts the brightness of the LCD display backlight.
19.Display Area: Displays Radio, CD and Clock functions.
20.Audio Mode Selection Button: Selects the desired audio mode in the following order: Volume, Bass, Treble, Balance and Fader.
Audio Beep: Press and hold the SEL button (20) for more then 2 seconds to turn beep on/off.
21.CD Slot: To access the CD Slot located behind the front panel, press the Open button.
22.Reset Button: The Reset Button is located behind the CD Door, below the CD Slot. It must be pressed with either a ballpoint pen tip or paper clip for any of the following reasons:
•Initial installation of the unit when all wiring is completed.
•All the function buttons do not operate.
•Error symbol on the display.
If there is a disc in the slot when the reset button is pressed the disc will be ejected.
3