5) 
Remote Control Operating Instruction:
1.Mute:
If there is
turn on sounds.
2.Stander-by:
when the monitor is at work. Push this button, the MCU in the monitor will stop working with low power consumption, push this button again the monitor will recover to work normally.
5.AV transfer:
use to switch the two way video and audio signal.
6.Simulating measure increase:
increase the picture brightness, color saturation , contrast , color hue and volume total 5 contents. You can adjust the content associate with the stimulating measure.
7.Simulating measure decrease:
decrease the picture brightness, color saturation, contrast, color hue and volume total 5 contents, you can adjust the content associate with the stimulating measure
8.Simulating choice:
According to personal favor, you can adjust each simulating measure, push this button to choose the simulating measure, push this button, it will display the content as the order:
Brightness-color-saturation
Decide which content you need to adjust. Push key 6 or 7 again to adjust this content. (It will be effective only for the hue adjustment in NTSC system)
6)
OPERATING METHOD
Please acquaint the function of each key on the monitors and remote controller before using (Refer to the operating instruction of the remote controller and monitor operating instruction)
When you adjust the brightness, colour saturation, contrast, hue and volume of the picture to the best mode, if you want to keep this mode when you open the machine each time, if the brightness you used now is different with last time, you can repeat operating way as above. (adjust again as the way in operating instruction.)
Because the monitors has built in video system
7)
PRECAUTIONS
This monitor adopt the DC power supply, so please distinguish the positive polarity and negative polarity of the power and use it within the regulated power supply
or above the temperature of 40 
. Avoid the dampness, liquid, metal body etc. enter into the monitors. Avoid to cause
the leaking of electricity and short circuit to damage to the LCD monitors.
Do not operate the monitor when temperature below 15 
Since there is
8)
ACCESSORIES
1.Remote Controller 1 pcs
2.Power and video input connecting wire 1 pcs
3.User s manual 1 copy
9.Volume decrease:
if there is 
to reduce the volume till no sounds.
10.Volume increase:
if there is
11.Colour Saturation Decrease:
push the key to reduce the color saturation to colorless.
12.Colour Saturation Increase:
push the key to increase the color saturation to maximum gradually
13.Contrast decrease:
push the key to decrease the picture contrast gradually.
14.Contrast increase:
push the key to increase the picture contrast gradually.
15.Brightness decrease:
push the key to decrease the picture brightness gradually.
16.Brightness increase:
push the key to increase the picture brightness gradually.
MD
L/R
U/D
AV
- SEL +
3 | 4 |