Bogen CAM2 specifications Microphone Cable Wiring, Aux

Page 7

Input Connections

Microphone Cable Wiring

The CAM2 has female XLR connectors as its microphone inputs, these connectors have 3 pins and are designed to be connected to balanced, low-impedance microphones.These microphones require 3 connections and use a cable that has two insulated conductors and a shielding material that encases the conductors (the shield provides the third connection). The use of balanced microphones provides superior protection against the pickup of unwanted hum, noise, and interference. It allows long cables to be used to connect the microphones to the CAM2.

The figure below shows how to wire the Male and Female XLR connectors onto a 2-conductor with shield cable to make custom microphone cables.

AUX IN

Certain music input sources, such as tape decks and CD players, send larger signal levels that microphone inputs are not suited to accept. Microphone inputs are very sensitive and if one of these devices were connected to a microphone input, then the output from the CAM2 would be distorted and unusable.

Since it is common to have recorded music mixed together with live sound from microphones, the CAM2 provides a single AUX input for the connection of a tape deck, CD player, tuner or similar equipment.The AUX IN connec- tion has the appropriate input sensitivity to accept signals from these types of equipment.The input uses an unbal- anced RCA connector which is typical of the output from playback equipment. RCA patch cords are readily avail- able for making connections to this input. However, this is a mono input so the output from a stereo source must be combined by a Y-adapter so that both halves of the stereo playback are heard. The AUX input is an unbalanced input.When using unbalanced inputs, it is a good idea to keep the length of the connecting cable to 10 feet or less.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CAM2 Mixer/Pre-Amplifier Domestic and International Listings Contents Installation Introduction & InstallationIntroduction Front Panel Panel DescriptionsRear Panel Input Connections Phantom PowerMicrophone Inputs AUX Microphone Cable WiringBAL/OUT to Balanced Input of Other Equipment Output ConnectionsBAL/OUT to Microphone Input of Other Equipment Line OUT Bridging Connections Bridging MixersOperation Audio System Level Setting System LevelsSpecifications Limited Warranty Spring Street, Ramsey, NJ 07446, U.S.A

CAM2 specifications

Bogen CAM2 is a cutting-edge intercom system designed to enhance communication in educational institutions, corporate environments, and various other settings. This versatile device is particularly valued for its reliability, ease of use, and advanced technology, making it an ideal choice for modern communication needs.

One of the main features of the Bogen CAM2 is its robust audio quality. The system utilizes advanced digital signal processing to ensure clear and crisp audio transmission, minimizing distortion and enhancing voice clarity. This high-quality sound output is crucial in settings where clear communication is necessary, such as classrooms, conference rooms, and public areas.

Another significant characteristic of the Bogen CAM2 is its scalability. The system can accommodate various configurations, allowing users to expand their intercom network as needed. Whether a small installation for a single building or a large-scale deployment across multiple campuses, the Bogen CAM2 can efficiently adapt to the requirements of diverse environments.

The Bogen CAM2 incorporates powerful technologies such as Voice over IP (VoIP), which enables seamless integration with existing network infrastructure. This feature not only simplifies installation but also enhances flexibility, allowing users to connect various devices while maintaining reliable communication channels. Moreover, the system is compatible with both wired and wireless setups, providing further options for deployment.

Robust security features are also integral to the Bogen CAM2 system. It includes encryption protocols that safeguard communications, ensuring that sensitive information remains protected from unauthorized access. As safety becomes an increasing concern in various settings, the Bogen CAM2 addresses these issues with effective security measures.

User-friendliness is another defining trait of the Bogen CAM2. The interface is designed for intuitive operation, which minimizes training time and encourages widespread adoption across all user levels. From students in classrooms to employees in corporate environments, all users can easily navigate the system.

Additionally, the Bogen CAM2 offers various connectivity options, supporting both traditional intercom devices and modern IP-based solutions. This feature makes it suitable for hybrid systems where both old and new technologies coexist.

In summary, the Bogen CAM2 stands out as a sophisticated intercom system that combines audio excellence, scalability, and advanced technologies. Its security features, user-friendly interface, and adaptability make it a top choice for institutions looking to enhance their communication capabilities effectively.
Top Page Image Contents