Kramer Electronics KDS-MP1 user manual

Page 49

4.Wait until the files are copied and then disconnect the USB memory stick.

5.Turn On the power on the display that is connected to the output of the KDS-MP1Digital Media Player.

6.Connect the USB keyboard to the USB port on the KDS-MP1Digital Media

Player.

The KDS-MP1Media Player will boot up into the configuration mode.

7.Go to the firmware update menu (see Section 5.2) and follow the instructions on the display.

8.When prompted, connect the memory stick to the USB port on the

KDS-MP1.

The firmware update process starts immediately and the progress bar on the display shows the status.

!

i

Do not remove the memory stick or turn the power Off before update is complete.

Upon completion of the update, the KDS-MP1restarts automatically and starts playback.

9. Remove the memory stick.

KDS-MP1 - Firmware Update	45

Image 49

Contents KDS-MP1 Page Contents Figures Introduction Getting Started Safety InstructionsAchieving the Best Performance Recycling Kramer Products Overview KDS-MP1Digital Media Player featuresKDS-MP1 Manager This section defines the KDS-MP1 Defining the KDS-MP1 Digital Media Player∙ Configure the machine, see Section About KDS-MP1 SetupConnecting the KDS-MP1 Keyboard to one of the USB connectors see Figure Accessing the Menu Configuring the KDS-MP1Main Menu This section describes the configuration main menuSetting the Time Zone Set the ResolutionKDS-MP1 Configuring the KDS-MP1 KDS-MP1 Configuring the KDS-MP1 Setup Process KDS-MP1 Manager InstallationFor Windows XP only .Net Installation KDS-MP1 Manager lets you KDS-MP1 Manager OperationSelect one of the following schedules Schedule ModesLooping Mode Looping Schedule Layout Editor Button click to expand Sequence KDS-MP1 KDS-MP1 Manager Operation RSS Mp3 File Looping Example Setting the Weekly Schedule KDS-MP1 KDS-MP1 Manager Operation Scheduled block appears colored on the weekly schedule Becomes inactive and is marked OFF on a dark gray background KDS-MP1 KDS-MP1 Manager Operation Proceeding to Export Export the ScheduleExporting via the Network Or click the Add button to manually add a machine Files Exported to the Media Player You can click the Log button to review the export process Exporting via USB USB Content Warning Exporting via USB memory stick Menu Menu Item MenuClick Firmware Update Firmware UpdateFirmware Update Window via Network Firmware Update via NetworkFirmware Update Window via USB Firmware Update via USBSelect Firmware KDS-MP1 Outputs Technical SpecificationsPage Safety Warning