Harman-Kardon HKS 3 owner manual Mounting Options, Wall-Mounting

Page 5

Mounting Options

Wall-Mounting

Unscrew the bolt that attaches the black shelf stand to the bottom of the speaker. Store the stand and bolt in a safe place in case they are needed for a future installation.

Remove

Stand

15mm or 1/2"

Wall Plate

Mount the wall-bracket attachment plate on the wall in the desired location.

If possible, position the speakers so that the mounting screws (not included; use size #8) may be installed directly into a wooden wall stud.

If that is not possible, use optional wall anchors that are rated to support at least twenty-five pounds. The customer is responsible for proper selection and use of mounting hardware, available through hardware stores, to properly and safely wall-mount the speakers.

 

Wires to Speaker

 

Terminal Cover

 

Wire

Overhead

From

Wall

View

Plate

The bracket has two openings on top: a round screw hole, and an arc-shaped opening in front of it. The speaker cable should be threaded through the arc-shaped opening, not the screw hole.

Attach the bracket to the wall plate by inserting the tab at the top of the attachment plate into the slot on top of the bracket and snapping the bracket onto the attachment plate.

Thread the cable through the round opening in the terminal cover, and then insert the speaker wires into the terminals on the underside of the speaker, remembering to observe the correct polarity (see page 6).

Place the terminal cover over the opening on the underside of the speaker so that it fits flush against the speaker and covers the terminals, with its round opening exposing the threaded insert. The bracket fits through the round open- ing in the terminal cover.

The wall-mounted speaker may be pivoted from side to side; however, the bracket is not designed to tilt up or down, and attempting to tilt it will damage the bracket and possibly the wall, which would not be covered by your war- ranty.

Wall

23mm or 3/4"

(M6–1.25P or 1/4"–20)

Referring to the speaker connection instructions on page 6, thread the appropriate speaker cable through the opening in the bottom of the attachment plate, and then through the back of the bracket as shown in the diagram.

Wall Bracket

Insert the supplied bracket bolt up through the bottom of the bracket and terminal cover, and screw it into the threaded insert on the under- side of the speaker. The bolt should be snug, but not so tight as to prevent the bracket from pivoting.

MOUNTING OPTIONS 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HKS 3 Surround Loudspeakers Declaration of Conformity Table of ContentsIntroduction Description and FeaturesIntroduction IncludedWhen Used as Front Speakers Speaker PlacementWhen Used as Surround Speakers Color-Coding SystemWall-Mounting Mounting OptionsSpeaker Connections Configuring Your Receiver or ProcessorLeft Speaker LeftIf there is low or no bass TroubleshootingOutput If there is no sound fromSatellites Specifications

HKS 3 specifications

The Harman-Kardon HKS 3 is a remarkable audio system that stands out for its commitment to exceptional sound quality and innovative technologies. Designed for both music enthusiasts and casual listeners, this speaker system combines aesthetic appeal with functional excellence, making it a must-have for any audio setup.

One of the main features of the HKS 3 is its advanced sound architecture. It utilizes a high-performance speaker driver that delivers clear highs, rich mids, and deep bass, ensuring every note is reproduced faithfully. This dynamic range allows users to enjoy various music genres, from classical symphonies to modern pop tracks, with outstanding clarity.

The HKS 3 also incorporates Bluetooth connectivity, enabling seamless wireless streaming from smartphones, tablets, and other devices. This feature allows users to play their favorite music without the hassle of wires, creating a clutter-free listening experience. The speaker is equipped with a stable wireless connection that ensures minimal latency and maximum enjoyment during playback.

In addition to Bluetooth, the HKS 3 comes with a built-in multi-room functionality. This allows users to connect multiple HKS 3 units throughout their home, creating a synchronized audio experience. With the companion app, users can easily manage music playback across different rooms, allowing for a personalized and immersive audio environment.

Moreover, the HKS 3 is designed with power efficiency in mind. Its energy-saving mode automatically activates when the system is idle, reducing power consumption without compromising performance. This makes it an environmentally friendly option for consumers who prioritize sustainability.

Another noteworthy characteristic of the Harman-Kardon HKS 3 is its sleek and modern design. The elegant curves and premium finish make it an attractive addition to any home decor. Its compact size allows for versatile placement, whether on a shelf, table, or mounted on a wall.

Finally, the HKS 3 includes various input options, including auxiliary and USB ports, making it compatible with a wide range of devices. This versatility enhances its usability, allowing users to connect traditional audio sources alongside their wireless devices.

In summary, the Harman-Kardon HKS 3 represents a blend of cutting-edge technology and aesthetic sophistication, providing users with an unparalleled listening experience. Whether for casual use or serious audio enjoyment, the HKS 3 is designed to meet the needs of modern consumers, ensuring that music is delivered in the highest quality possible.
Top Page Image Contents