Fusion EN-3004, En-1502 manual 4B. Internally Linked Output EN-3001 only Coils in Parallel

4B. INTERNALLY LINKED OUTPUT (EN-3001 ONLY) -

COILS IN PARALLEL

EN-3001

The EN-3001 Monoblock amplifier provides dual output connections to simplify wiring when using two subwoofers or a dual voice coil subwoofer. Both positive and negative terminals are internally connected or linked in parallel. For dual coil (2 x 4 Ohm) or two single coil (4 Ohm) subwoofers, connect each coil to a positive and negative terminal. For a standard single coil subwoofer connect to either positive and either negative terminal.

EN-3004

2 x Speakers Front Channels

4C. BRIDGED CONNECTION (EN-1502 AND EN-3004)

By connecting a speaker or subwoofer to the positive terminal of one channel and the negative of the other channel, you are combining the output of two channels into one. This gives you higher output levels as noted in the specifications but you must observe the minimum load impedance as failure to do so will result in damage to the amplifier.

EN-3004

Example of 3 channel configuration.

(4 Ohm Subwoofer) Bridged rear channels

5