Eclipse - Fujitsu Ten CD3434 owner manual Preset station scan

Page 53

How to operate the tuner

Buttons [1] to [6]

[SEL]

button

[FM AM] button

Preset station scan

This function enables reception of all the stations in the preset buttons for five seconds each.

1 Press the [SEL] button for less than one second.

[P SCAN] will appear at the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.

2

To stop the preset scan mode at a desired station, press

 

the [SEL] button again.

The receiver will stay tuned to the desired station.

Changing the reception sensitivity for automatic scanning

The deck lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitivity modes available for this deck are AUTO mode and DX mode.

 

During automatic scanning, the reception sensitivity

 

switches automatically to one of two levels. Initially the

AUTO mode

reception sensitivity is set to the low level so that only

stations with strong signals are received. If no stations

 

could be received, the reception sensitivity is increased

 

so that stations with weaker signals can also be

 

received.

 

 

 

Because the reception sensitivity for automatic scanning

DX mode

is set to the high level from the start, even stations with

weaker signals can be received. (Signal crossover may

 

 

result in some stations being hard to hear.)

 

 

1

Check that the deck is in standby mode.

2

Press and hold the button [1], then [FM AM] button, and

 

hold both for more than three seconds.

The mode switches between AUTO mode and DX mode each time the buttons are pressed.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Model CD3434 For your safety in using CD3434 Page Page Page Page Table of Contents How to operate the CD player How to use the Card remote control How to contact customer service Operating precautions About compact discs About brand new CDs About cleaning a CD With the front open Names of controls and partsFront view About ESN ESN security operating procedureHow to program the Key CD How to operate the ESN Key CD securityInsert your Key CD into the slot. The front panel closes How to cancel the Key CDHow to resume normal operation ESN security lock out How to change the Key CDWhat happens if an incorrect CD is inserted? How to read the Electronic Serial Number How to turn the security indicator on/offBasic operation Turning the power on and offPress the Open button for less than one second Listening to a CDInsert a CD into the disc slot, label side up Press the Open buttonListening to the tuner Turn the Audio Control button to the left or right Adjusting audio volumeMuting the volume VOL Volume Mode Switching audio control modesBass Mode Treb Treble ModeNON-F NON-FADER Mode BAL Balance ModeFAD Fader Mode Setting example SVC Source Volume Control ModeLoud on display appears on the screen Enabling the loudness controlPress and hold the Audio Control button until Turn SEL button in either direction to display setting Making changes with Function ModePress the Func button Items for selectionDisabling the guide tone feature for button operation Contrast adjustmentClock Display on/off Setting the time Press the Sound button Making changes with Sound Adjustment ModeDisabling the Cross Over F,R function Disabling the Cross Over NF function Switching Non-Fader modesPress and hold the Open button for more than one Adjustment of the front panel angleSecond Press the Open button again for more than one secondPress the Disc button How to operate the CD playerListening to CDs Playing the beginning of tracks Scan Fast Forward/RewindTurn the SEL button to the left or right Press and hold the Seek or Fast buttonPlaying tracks in random order Random Repeating the same track RepeatPress button 5 to repeat the track being played Press button 6 to play the tracks in random orderRemove the disc and press the Open button Ejecting the discPress the Disp button for more than one second Displaying CD TextWhat is MP3? How to operate the MP3 playerPlayable MP3 file standards ID3 tagsFormat of discs MediaMulti-sessions File namesPlaying MP3 MP3 playing time displayListening to MP3 file Skipping to the next or previous folder Fast Forward /RewindReturn to the root directory of the CD Press button 1 orRepeating the same file Repeat Playing the beginning of files ScanDisplaying title Playing files in random order RandomTuning to a station How to operate the tunerBeep is heard Press the SEL button for more than one second until aPress the FM AM button to switch between FM and AM Manually setting stations into memoryTurn the SEL button to the right or left to tune to Station to be entered in memoryPreset station scan Press and hold the button 3, then FM AM button, Changing the radio band locationFading out FM reception characteristicsFM reception differs from AM Multipath Reception area of FM broadcastsPrecautions in use of the remote control How to use the Card remote controlAdjusting the audio volume Turning the power on/offPress the PWR button Press the + or buttonHow to play the tuner Switching playback modesPress the Mode button Selecting the FM/AM bandSelecting preset stations How to play CDsSwitching disc modes Selecting a station manually or automaticallyPress the Trackaps button. button Skips to the next track Skipping to the next or previous discReplacing the battery Left or right Press the Audio Control button, and turn it toBand button Band Mode Mode button Band button Tuneseek buttons Press the Track button Illuminating the NOB remote controlGently pressing and sliding it in the direction indicated by Remove the back cover of the remote control unit byHow to use an optional NOB remote control Disc button Seek button SEL button Playing the beginning of tracks Scan Skipping to the next or previous CD Specifying a CD to play If you have a question Mechanically Displayed information for troubleshootingMode Problem Causes Remedial action Refer To take Is an extra label or seal General SpecificationsComponents Before installationInstallation angle Mounting the main unit Mounting instructionInstall the bezel on the main unit Fasten the rear of the main unit using either method aMount the stud bolt to the main unit PlaceNames of lead wires and destinations refer to System CD3434 Receiver, used alone CD3434 + CH3083 + Power Amplifier CD3434 + CH3083 + CH3083 + Power Amplifier How to contact customer service Taiwan M o M o M o Record Your KEY CD HERE… Store Your KEY CD Fujitsu TEN Limited

CD3434 specifications

The Eclipse - Fujitsu Ten CD3434 is a premium automotive audio system that exemplifies innovation, sound quality, and user-friendly technology. Renowned for its durability and superior performance, this model offers a range of features designed to enhance the in-car listening experience.

One of the standout features of the CD3434 is its high-fidelity sound output. Equipped with a powerful amplifier and advanced digital signal processing, this unit ensures crystal-clear audio across various genres of music. The dynamic range and tonal balance allow users to enjoy their favorite tracks as they were meant to be heard, with deep bass and sparkling highs.

In terms of versatility, the CD3434 supports multiple audio formats. Users can play music from CDs, MP3 files, and WMA formats, providing flexibility for different media types. The inclusion of USB and auxiliary inputs makes it easy to connect external devices such as smartphones and portable music players. This ensures that users have access to their entire music library without restrictions.

Another significant characteristic of the Eclipse - Fujitsu Ten CD3434 is its intuitive interface. The user-friendly controls and display make it straightforward to navigate through various audio sources and settings. The bright, easy-to-read display provides clear visibility of track information, making it simple to find songs on the go.

Additionally, the CD3434 integrates advanced technologies for an enhanced listening experience. It includes features like customizable equalizer settings, allowing users to tailor the sound output to their taste. The built-in Bluetooth functionality enables hands-free calling and wireless audio streaming, ensuring safety and convenience while driving.

Durability is a hallmark of Fujitsu Ten products, and the CD3434 is no exception. Designed to withstand the rigors of automotive environments, it is built with high-quality materials that resist wear and tear. This long-lasting performance ensures that users can enjoy their investment for years to come.

In summary, the Eclipse - Fujitsu Ten CD3434 combines exceptional sound quality, versatile media compatibility, user-friendly controls, and durable construction. With its modern technological features and attention to detail, it stands out as a leading option for car audio enthusiasts who seek both performance and reliability. Designed for the modern driver, the CD3434 transforms any journey into an enjoyable auditory experience.
Top Page Image Contents