Audio Connection
Two audio patch cords are provided to make audio connections. One cord is a mono patch cord (one RCA plug at each end) and the other is a
1. Connect the stereo end (two RCA plugs) of the
2.Connect the other end (one RCA connector) of the
Note: Mono operation is appropriate for most paging applications. If mono operation is selected via the front panel, use the supplied
Operation
FRONT
VIEW
POWER
UP | BAND | MSCAN | M1 | M2 | M3 |
TP30D DIGITAL TUNER |
|
|
|
|
|
DOWN | MONO | ME | M4 | M5 | M6 |
Power – Press the front panel POWER switch to apply power. Adjust the volume to the appropriate level using the amplifier volume controls.
To Select a Band – Press the button marked BAND. The current band appears on the display: FM1, FM2, FM3,AM1 or AM2. You can preset up to six stations on each band for a total of 30 preset stations (18 FM and 12 AM). To tune a station, press the UP or DOWN buttons.
To Preset Stations
1. Select a band and tune the first desired station.
2.Press the ME button and then one of the "M" buttons; for example, M1. (The preset number appears on the display as: CH1.)
3.Tune the next station, press ME and the M2 button, etc., and continue for the 2nd through 6th presets.
To Scan Preset Stations
1. Select a band. The first preset station (CH1) will appear on the display.
2.Press the button marked MSCAN. Each preset station will play for a few moments in turn while scanning.
3.To select a station during scanning, press the "M" button that corresponds to the CH number on the display.
Specifications
. . . . . . . . . . . . . . . . . . .AM Band Coverage | .530 – 1620kHz |
FM Band Coverage | .87.5 – 107.9MHz |
Tuning | .PLL Synthesizer |
Channel Indicator | .LCD Panel |
Station Tuning | .Pushbutton |
Preset Memory | |
Memory Scan | .Preset Stations |
Antenna Connectors | .FM – 75Ω, 300Ω, AM |
Audio Output | .1V, Stereo Out |
Output Terminals | .RCA Jacks |
|
|
Page 4 of 4