Basic operation
Basic operation
[PWR] button
This section covers basic operating procedures. For additional details, please refer to the sections on specific functions.
Turning the power on and off
Turning the power on and off.
When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored.
When the vehicle has no ACC position on the ignition switch, care is needed when turning off the deck. Follow Step 2 or Step 3 when turning off the power.
1 When power is OFF, press [PWR] button.
The power will come ON.
When the deck's power is turned on for the first time or if the
ATTENTION battery terminals have been disconnected because of a reason such as vehicle maintenance and the power is then turned back
on, the deck will start up in FM1 mode. After this, the broadcast stations will be searched for automatically and stored in buttons [1] to [6].
2 | When power is ON, press the [PWR] button for less than |
| two seconds. |
The power will go OFF and the deck will be in Standby.
If you press the [PWR] button again for more than one second, the power will go completely off.
3 | When power is ON, press the [PWR] button for more |
| than two seconds. |
The power will go completely OFF.
If a car is not equipped with an ACC position (for example, a ATTENTION European car), keep the [PWR] button depressed for more than
two seconds.
22