Key Features | Electro-Voice EVU-2062/95 instruction

EVU-2062/95

Dual 6.5” Two-Way

90° x 50° Full-Range

Loudspeaker System

Key Features:

• 1.3” (33 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver

•Dual 6.5” (165 mm) LF transducers

• Advanced third-order crossover network with HF protection

• Coverage pattern: 90° x 50° Constant DirectivityTM rotatable waveguide

• 94 dB sensitivity, 125 dB maximum SPL

• System rating: 300 W continuous, 1200 W peak

• Universal U-bracket included

• 70.7/100-V transformer accessory optional

•NL4 cover plate accessory optional

•(6) M8 threaded suspension points

General Description:

The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker system that can be used in a variety of applications where high qual- ity sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage patterns making it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applica- tions.

The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” dia- phragm titanium compression driver coupled to a Constant Direc- tivity™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was developed using FEA optimization to provide the highest sensitivity while achieving the highest level of speech intelligibility. The cross- over design uses 18-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response and a protection circuit for long term reliability.

The EVU series is constructed of 9-ply hardwood plywood enclo- sures with six integral M8 suspension points to support a wide va- riety of mounting positions. The EVU system is finished in textured paint, available in either white or black. Each EVU system includes a universal U-bracket to facilitate mounting. The U-bracket provides full unobstructed rotation of the loudspeaker (330° unobstructed ro- tation if the transformer kit is installed). Additional mounting points are located on the rear of the enclosure for use with an Omnimount™ type bracket. An available 70.7/100-V transformer kit may be easily mounted over the input panel for use in distributed systems. All of these features give you the flexibility to address a large range of venues, while quickly and precisely supporting customer require- ments.

Technical Specifications:

Freq. Response1 (-3 dB):	100 Hz - 16 kHz
Freq. Range1 (-10 dB):	70 Hz - 20 kHz
Rotatable Coverage:	90° x 50°
Rec. High-Pass Frequency:	90 Hz
Passive Crossover Freq.:	2400 Hz
Axial Sensitivity1:	94 dB (1 W/1 m)
Max. Calculated SPL1:	125 dB
Passive Power Handling2:	300 W continuous, 1200 W peak
Impedance:	8 ohms (nominal), 6.0 ohms (min.)
LF Transducers:	Dual ICT-6.5-16, 6.5” (165mm) drivers
HF Transducer:	ICT-1-8, 1.3” (33mm) diaphragm
	compression driver
Connectors:	Single four-pin 12 AWG Phoenix/Euro
	Block screw-terminals
Enclosure:	9-ply hardwood plywood with
	textured paint
Grille:	18 GA steel with cloth
Environmental:	IEC 60529
Suspension:	(6) M8 threaded suspension points
Dimensions	8.21” x 20.98” x 8.14”
(H x W x D):	(208.4 mm x 532.9 mm x 206.7 mm)
Net Weight:	25.0 lb (11.3 kg)
Shipping Weight:	31.2 lb (14.2 kg)

1Half-space measurement.

2EIA RS-426A, tested for eight hours.

EVU-2062/95 specifications

The Electro-Voice EVU-2062/95 is a professional loudspeaker system designed for use in a variety of audio applications. With its rugged construction and advanced acoustic technologies, it is suitable for concerts, events, and installations where high-quality sound reproduction is essential.

One of the standout features of the EVU-2062/95 is its dual 6.5-inch woofers, which provide robust low-frequency response while maintaining clarity in the mid-range frequencies. These woofers are designed specifically to perform in both high-pressure and long-duration scenarios, making them ideal for live sound reinforcement. The loudspeaker is equipped with a high-efficiency 1.5-inch compression driver that couples to a 90° x 50° horn. This offers both excellent coverage and a controlled dispersion pattern, preventing sound spill in unwanted areas.

The EVU-2062/95 is notable for its innovative technologies aimed at enhancing performance. One such technology is the advanced waveguide design, which helps in achieving a smooth high-frequency response across its specified frequency range. This results in a more natural sound reproduction that is crucial for accurate vocal and instrument presentations. The speaker’s frequency response spans from 50 Hz to 20 kHz, ensuring a full-range experience.

Another important characteristic of the EVU-2062/95 is its versatile enclosure design, which can be deployed in various configurations. It is constructed from high-quality plywood and coated with a durable finish, ensuring longevity and resistance to wear and damage. The design incorporates M10 rigging points for easy installation options, making it adaptable for both permanent and temporary setups.

Additionally, the EVU-2062/95 features a lightweight yet sturdy design, facilitating ease of transport and setup, which is particularly advantageous for mobile sound reinforcement applications. Built-in handles and a compact form factor allow for convenient handling and storage.

In summary, the Electro-Voice EVU-2062/95 is engineered to deliver exceptional sound quality and durability. With its advanced driver technologies, precise dispersion characteristics, and robust construction, it stands as a reliable choice for audio professionals seeking high-performance loudspeakers for both live and installed audio environments. Its versatility and efficiency make it an invaluable addition to any sound reinforcement system.