5. Hints and tips
5.4. Default values
Before Dual Manager has been executed for the first time and Presets have been defined by the user, the amplifier firmware uses default values for the various parameters, as listed below:
SECTION | PARAMETER | DEFAULT VALUE |
Crossover | Slope,dB | 12 |
| Frequency, Hz (High Pass) | 500 |
| Frequency, Hz (Low Pass) | 5000 |
| Crossover type | |
| Filter type | |
|
| |
Level, dB | 6 | |
| Frequency, Hz | 80 |
| Q | 1.0 |
Input Section |
|
|
Channel | Left/Right | |
| Input Selector | Optical |
Output Section |
|
|
Level,dB | 0 | |
Equalizer |
|
|
Level,dB | 0 | |
| Q | 2.0 |
| Type | Peak |
Time Delay |
|
|
ms | 0 | |
Global |
|
|
Headroom (dB) | 6 | |
| All On/Off buttons | Off |
| Inverted button | Off |
| File name | No Name |
| User mode | Restricted |
|
|
|
5.5. System and error messages
Hereafter is a list of system and error messages, with their explanations or contexts.
• Loading stages on
“Wait hardware.”
“Init hardware.”
“Create amplifier screen”, “Init amplifier screen”, “Read config file”,”First device automatic selection.”
Wait idle state in hardware.
Initialize hardware data.
Create visual data.
15