Using Bluetooth: Pairing Your Device Manually | Using the iBN16 |
1.Turn on your
2.Slide the Power OFF/Bluetooth/Aux Switch on the unit to the 
position. The unit will turn on and attempt to auto link to a previously paired device for 10 seconds, indicated by a 3 note tone and the Power/Charging/Pairing Indicator Light on the back of the unit flashing blue. If a linked device is found, the indicator will glow solid blue.
3.If no linked device is found, the unit will enter pairing mode, indicated by a 1 note tone and the Power/Charging/Pairing Indicator Light on the back of the unit will flash blue and red while the unit attempts to pair. “iHome iBN16” should appear on your device’s menu. On some devices, tap on the device name to begin pairing. If your device asks for a password, enter 1234 on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to auto link mode. To retry pairing, move the Power OFF/Bluetooth/Aux Switch to the 
position then move it back to the 
position.
4.Once paired with a device, the Power/Charging/Pairing Indicator Light on the back of the unit will glow blue steadily. There should be an indication on your device that pairing is complete. On some devices, you must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device should link to the iBN16 whenever within range.
Pairing with a Different Device
1.When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device.
5