Troubleshooting | Gemini CDX-2200 manual

CDX-2200

press PGM and the CDX-2200 will be ready to set your next selection. Repeat the previous steps until you have complet- ed your play list, then press play to begin the set list.

11 SINGLE: Pressing the SINGLE button engages SINGLE mode, in this mode the CDX-2200 will play one song and then stop. Pressing the SINGLE button again will then acti- vate CONTINUOUS mode causing the unit to play continu- ously (after the last track, the unit will return to the first track of the disc and continue to play).

12TIME: The TIME button switches the time display between three available sources, these three are TIME ELAPSED on the track, TOTAL REMAIN on the disc and REMAIN on the track. TIME ELAPSED indicates how much time has cur- rently gone by since the play button was pressed, TIME RE- MAING ON DISC will count down the time remaining on the entire disc and TIME REMAINING ON TRACK counts down the time that is left before the end of the track.

13PITCH: Press the PITCH button to activate the PITCH CON- TROL SLIDE. Pitch range that can be controlled through the use of the PITCH CONTROL SLIDER. Press the PITCH but- ton again to deactivate this mode.

14PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE up or down will change the pitch percentage +/ - 12%.

15PITCH BEND: Pushing the PITCH BEND BUTTONS will au- tomatically raise the pitch up to +16% or lower the pitch down to -16% from the existing pitch setting. Releasing the buttons will return the pitch to the original pitch setting. You can use this function to match the beat when mixing from one song to another.

16LOOP SECTION: A LOOP repeats the section between the entry point (LOOP IN) and the exit point (LOOP OUT).

A.To set a loop while the unit is playing, start by pressing the LOOP IN BUTTON (it will light up)

B.When you reach the desired end loop point press the LOOP OUT BUTTON (it will also light up). The LOOP IN and LOOP OUT buttons will blink. The loop will continue playing until you press the LOOP OUT BUTTON again allowing the music to continue from that point on.

C.To re-engage the loop you must press the RELOOP BUTTON.

D.When you have released your loop the LOOP IN and LOOP OUT BUTTON buttons will turn OFF and the will remain lit to indicate that your loop is stored in the CDX- 2200 memory.

E.Pressing the LOOP IN BUTTON again while the unit is playing will erase the previously saved loop while saving your new loop entry point.

F.Press LOOP OUT to exit the loop and save a new com- plete loop.

G. Press RELOOP to return to the beginning of the previ- ously saved loop from normal play. Press RELOOP repeat- edly to cause the loop to stutter.

NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT, WHILE ALL OTHERS WILL BE SEAMLESS.

17PLAY / PAUSE: Each press of the PLAY / PAUSE BUTTON causes the operation to change from PLAY to PAUSE or from PAUSE back to PLAY. The PLAY/PAUSE BUTTON remains lit when in PLAY mode, while it blinks in PAUSE mode.

18CUE: To set a CUE point, press the PLAY / PAUSE BUTTON while a file is playing, and use the JOG WHEEL to adjust the file to a desired point in the track. Pressing the PLAY / PAUSE

BUTTON will set a CUE point. While the unit is playing and after the cue point has been programmed, pressing CUE will cause the CD player to enter the PAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cue point (the CUE LED is lit). Holding down the CUE button changes the function to preview, and allows you to stutter start or play from the pro- grammed CUE POINT. Releasing the CUE button will return the CD to the preset CUE point.

19TRACK SEARCH: The TRACK SEARCH buttons let you se- lect the track to play. +10 allows you to scan through the track selection in increments of 10.

NOTE: ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PROGRAMMED CUE POINT. YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING OF THE NEWLY SELECTED TRACK.

TROUBLESHOOTING:

- If a disc will not play, check to see if the disc was loaded cor- rectly (label side up). Also check the disc for excessive dirt, scratches, etc.

- If the disc turns but there is no sound, check the cable con- nections, if they are ok, check your amplifier or receiver.

-If the CD skips, check the CD for dirt or scratches. Do not as- sume that the CD player is defective. Many CD’s are recorded out of spec and will skip on most or all CD players. Before sending the unit for repair, try playing a CD that you are sure plays properly.

CDX-2200 specifications

The Gemini CDX-2200 is a cutting-edge digital server designed for the modern demands of data management and communications. With its robust architecture and advanced features, it caters to a wide range of applications, including cloud computing, big data analytics, and high-performance computing.

At the heart of the CDX-2200 is its powerful multi-core processor, which allows for simultaneous processing of multiple tasks and enables seamless data handling. This capability significantly enhances overall performance, making it ideal for enterprises looking for speed and efficiency. The processor is complemented by a substantial amount of memory, which ensures that data retrieval and processing occur with minimal latency.

One of the standout features of the CDX-2200 is its scalable storage solution. The server supports various storage configurations, from traditional HDDs to high-speed SSDs, providing flexibility based on workload requirements. This adaptability allows organizations to optimize their storage strategy and scale up or down as needed, thereby maximizing resource utilization.

The Gemini CDX-2200 also incorporates advanced networking technologies, including 10G Ethernet connectivity and support for various protocols. This ensures fast and reliable data transfer across local and wide area networks, which is critical for maintaining performance in data-intensive applications.

Security is a top priority for the CDX-2200, featuring built-in encryption capabilities and robust access control mechanisms. These security measures ensure that sensitive data is protected from unauthorized access and breaches, which is especially vital for businesses that handle confidential information.

The server is designed with energy efficiency in mind, incorporating power-saving technologies that reduce the overall energy consumption without compromising performance. This focus on sustainability not only lowers operational costs but also contributes to a reduced environmental footprint.

Furthermore, the Gemini CDX-2200 comes with a user-friendly management interface that simplifies monitoring and administration tasks. IT personnel can easily manage resources, monitor system health, and perform updates and maintenance, enhancing operational efficiency.

In summary, the Gemini CDX-2200 stands out for its powerful processing capabilities, scalable storage, advanced networking features, and robust security measures. Its design focuses on efficiency and user-friendliness, making it an ideal choice for businesses looking to harness the power of digital information in today's fast-paced environment. With its state-of-the-art technology and comprehensive features, the Gemini CDX-2200 positions itself as a vital asset for any organization seeking to enhance its data management infrastructure.